Product Description: Groco SW-2531 Bronze Spanner Wrench/Deck Plate Key Services deck plates or strainer caps with key holes up to 7" apart. Pins fit holes up to 5/16".ALT Part Numbers: GRO SW2531, 00-9460
Product Description: Groco AS-100 Bilge Pump Switch AS-100 uses the simple and reliable pressure fluctuation from a rising or falling bilge water level to turn your bilge pump on and off automatically. No floats to stick or fill with water. Approximate levels are on at 2-3/4" of bilge level and off at 1". Use with a pump that draws up to 10-amps running continuously or up to 20 amps running intermittently. NOT TO BE USED IN POTABLE WATER SYSTEMS.ALT Part Numbers: GRO AS100, 00-9382
Product Description: Groco CP-20 12V Centrifugal Pump 17 GPM Ideal for baitwell or any onboard pumping job that needs high flow and low pressure. Includes garden hose adapter. Motor is ignition protected. Includes an adapter for garden hose conection. NOT TO BE USED IN POTABLE WATER SYSTEMS.ALT Part Numbers: GRO CP20, 00-9392
Product Description: Groco SPO Heavy Duty Vane Pump 12V Delrin impeller and blades are not affected by diesel fuel or crankcase oil. Self-priming to 24". Mounts in any position in dry location. Motor not waterproof. 1/2" NPT threaded ports. Use 1/2" minimum or 5/8" for oil minimum reinforced hose. For pumping water amps/fuse is 7/15, and wire size is #12 up to 40'. For pumping oil amps/fuse is -17/30 and wire size is #8 up to 40'. NOT TO BE USED IN POTABLE WATER SYSTEMS.ALT Part Numbers: GRO SPO60N12V, 00-9444
Product Description: Groco SPO Heavy Duty Vane Pump 12V Delrin impeller and blades are not affected by diesel fuel or crankcase oil. Self-priming to 24". Mounts in any position in dry location. Motor not waterproof. 1/2" NPT threaded ports. Use 1/2" minimum or 5/8" for oil minimum reinforced hose. For pumping water amps/fuse is 7/15, and wire size is #12 up to 40'. For pumping oil amps/fuse is -17/30 and wire size is #8 up to 40'. NOT TO BE USED IN POTABLE WATER SYSTEMS.ALT Part Numbers: GRO SPO60R12V, 00-9445
Product Description: Groco PST-1 Pressure Storage Tank A pneumatic pressure charge, matched to the pump cut-on pressure prevents waterlogging by separating the air charge from system water pressure with a rubber bladder. The result is smooth pressure delivery, even temperature mix in showers, and reduced pump cycling. Mounts in any position and anywhere in the cold water plumbing after the pump. May be used for fresh or salt water. Operating pressure up to 100 psi. Mounting hardware included.ALT Part Numbers: GRO PST1, 00-9428
Product Description: Groco C-60 12V Deck Wash Kit With PGN-50 Spray Nozzle and CV-75 Check Valve Completely assembled and water tested salt water washdown system provides pressurized water on demand. For deck, anchor wash, or both. Features permanent magnet ball bearing motor, SPO-60-N vane pump, P-9021 in-line check valve and PGN-50 salt water nozzle. Coupled to combination check valve/pressure switch assembly. Mounted on a ready to install platform. Use PST-1 pressure storage tank to reduce pump cycling. PSI range is 15-35. Size: 9-1/2" L x 6-1/2" W x 4-3/4" H. NOT TO BE USED IN POTABLE WATER SYSTEMS.ALT Part Numbers: GRO C6012V, 00-9393
Product Description: Groco STH Bronze Scoop Thru-Hull With Nut Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS.ALT Part Numbers: GRO STH500W, 51-7015
Product Description: Groco STH Bronze Scoop Thru-Hull With Nut Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS.ALT Part Numbers: GRO STH750W, 51-7016
Product Description: Groco STH Bronze Scoop Thru-Hull With Nut Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS.ALT Part Numbers: GRO STH1000W, 51-7011