This is the new (November, 2021) Carp Coastal Marine website. Looking for our old online shopping website? Both websites allow purchasing of our entire line of marine supplies. Click Here for the old Marine Store

Brand: Pullrite

PULLRITE 79101 ADJUSTABLE FENDER HOLDER WHIT
Price: $19.67
You can be notified by email when this part becomes available for purchase.
Product Description: Seachoice Automatic Fender Adjuster - White
For use with wooden rails and pipe rails. Makes placing fenders easy. Eliminates tying/untying fender lines. Instant self locking action works automatically to raise and lower the fender and hold it securely in place. White vinyl strap w/stainless steel hardware. Snaps around rails. Accommodates up to 1/2" diameter line.
ALT Part Numbers: SCP 79101, 43-4103
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.

Brand:Pullrite

SKU:50-79101

UPC:719249791012

PULLRITE 79101 ADJUSTABLE FENDER HOLDER  WHIT
PULLRITE 3365 MULTI FIT CAPTURE PLATE
Price: $178.19
You can be notified by email when this part becomes available for purchase.
Product Description: Pullrite 3365 QuickConnect Multi-Fit Capture Plate for Fabex & Lippert King Pin Box Models
Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plate’s wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #3365 fits Fabex and Lippert model numbers 500's, 765, 770, 1621, 1621 HD, 1116, & 1716.
Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.
1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.
2) To ensure correct fit, make the necessary A, B and C measurements:
A: Measure the king pin plate from side-to-side. This is the most
important measurement. Be sure that this measurement is no more
than 1/16” less than the measurement listed which is 12 3/4" through 13 1/2" and 14" for part #3365.
B: Measure from the leading edge of the king pin to the leading edge of
the king pin plate. Part #3365 accommodates 2 9/16" through 4".
C: Measure from the rear edge to the leading edge of the king pin plate. Part #3365 accommodates all sizes.
ALT Part Numbers: PLR 3365, 31-7235
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.

Brand:Pullrite

SKU:337-3365

UPC:816456010926

PULLRITE 3365 MULTI FIT CAPTURE PLATE
PULLRITE 3366 MULTI FIT CAPTURE PLATE
Price: $178.19
You can be notified by email when this part becomes available for purchase.
Product Description: Pullrite 3366 QuickConnect Multi-Fit Capture Plate for Lippert King Pin Box Models
Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plate’s wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #3366 fits Lippert model number 0719.
Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.
1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.
2) To ensure correct fit, make the necessary A, B and C measurements:
A: Measure the king pin plate from side-to-side. This is the most
important measurement. Be sure that this measurement is no more
than 1/16” less than the measurement listed which is 12", 12 1/4" and 12 3/4" for part #3366.
B: Measure from the leading edge of the king pin to the leading edge of
the king pin plate. Part #3366 accommodates 5 3/16" through 6 5/8".
C: Measure from the rear edge to the leading edge of the king pin plate. Part #3366 accommodates all sizes.
ALT Part Numbers: PLR 3366, 31-7236
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.

Brand:Pullrite

SKU:337-3366

UPC:816456010933

PULLRITE 3366 MULTI FIT CAPTURE PLATE
PULLRITE 331756 QUICKCONNECT CAP.PLT.TRAILER/R
Price: $178.19
You can be notified by email when this part becomes available for purchase.
Item may be special order or out of stock. Please call 321-952-1303 or Contact Us for price and availabililty.
Product Description: Pullrite 331756 Quick Connect Capture Plate for Most Trailair Rota-Flex King Pin Box Models
Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plate’s wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #331756 fits most Trailair Rota-Flex Pin Box Models.
Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.
1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.
2) To ensure correct fit, make the necessary A, B and C measurements:
A: Measure the king pin plate from side-to-side. This is the most
important measurement. Be sure that this measurement is no more
than 1/16” less than 13 3/8".
B: Measure from the leading edge of the king pin to the leading edge of
the king pin plate, which should be 5 3/8".
C: Measure from the rear edge to the leading edge of the king pin plate which should be 11 7/16".
ALT Part Numbers: PLR 331756, 31-7226
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.

Brand:Pullrite

SKU:337-331756

UPC:816456010896

PULLRITE 331756 QUICKCONNECT CAP.PLT.TRAILER/R
PULLRITE 331705 SUPERGLIDE KIT LIPPERT LONG/MD
Price: $178.19
You can be notified by email when this part becomes available for purchase.
Product Description: Pullrite 331705 QuickConnect Capture Plate for Lippert King Pin Box Models
Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plate’s wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #331705 fits Lippert 1621, 1116, and 1716 models.
Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.
1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.
2) To ensure correct fit, make the necessary A, B and C measurements:
A: Measure the king pin plate from side-to-side. This is the most
important measurement. Be sure that this measurement is no more
than 1/16” less than 13-1/4".
B: Measure from the leading edge of the king pin to the leading edge of
the king pin plate, which should be 3-3/8".
C: Measure from the rear edge to the leading edge of the king pin plate which should be 8-7/8".
ALT Part Numbers: PLR 331705, 31-7218
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.

Brand:Pullrite

SKU:337-331705

UPC:816456010780

PULLRITE 331705 SUPERGLIDE KIT LIPPERT LONG/MD
PULLRITE 331757 QUICKCONNECT KIT
Price: $178.19
You can be notified by email when this part becomes available for purchase.
Product Description: Pullrite 331757 Quick Connect Capture Plate for Trailair Tri Glide Airbag/Shock King Pin Box Models
Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plate’s wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #331757 fits Trailair Tri Glide Airbag/Shock Pin Box models.
Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.
1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.
2) To ensure correct fit, make the necessary A, B and C measurements:
A: Measure the king pin plate from side-to-side. This is the most
important measurement. Be sure that this measurement is no more
than 1/16” less than 12 3/4".
B: Measure from the leading edge of the king pin to the leading edge of
the king pin plate, which should be 5 15/16".
C: Measure from the rear edge to the leading edge of the king pin plate. Part #331757 accommodates all sizes.
ALT Part Numbers: PLR 331757, 31-7227
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.

Brand:Pullrite

SKU:337-331757

UPC:816456010902

PULLRITE 331757 QUICKCONNECT KIT
PULLRITE 4408 SUPERGLIDE 3IN LIFT KIT
Price: $228.20
You can be notified by email when this part becomes available for purchase.
Product Description: Pullrite 4408 3" Lift Kit for 16K & 18K SuperGlide Models
When installing SuperGlide hitches, particularly with newer trucks - sometimes there's a concern about the clearance between the fender and the underside of the trailer. The SuperGlide 3" Lift kit is for those trucks with higher bed sides. Lift kit to be used with #4100 or #4400 Traditional Series hitches.
ALT Part Numbers: PLR 4408, 31-7246
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.

Brand:Pullrite

SKU:337-4408

UPC:816456010957

PULLRITE 4408 SUPERGLIDE 3IN LIFT KIT
PULLRITE 3119 SG12K FORD BRACKET
Price: $874.82
You can be notified by email when this part becomes available for purchase.
Product Description: Pullrite 3119 Traditional Series SuperRail #3100 Mounting Kit for 2009-2014 Ford F150 (5'7" Bed) Pickup Trucks
#3100 SuperRail Kits fit 5-1/2' bed trucks. Use only with #3100 SuperGlide. Includes removable SuperRails & posts, mounting brackets & hardware. The #3100 features a totally removable baserail design. Features clean bed technology.
ALT Part Numbers: PLR 3119, 31-7213
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.

Brand:Pullrite

SKU:337-3119

UPC:816456010070

PULLRITE 3119 SG12K FORD BRACKET
PULLRITE 331730 SUPERGLIDE CUSTOM PLATE KIT
Price: $178.19
You can be notified by email when this part becomes available for purchase.
Product Description: Pullrite 331730 Quick Connect Capture Plate for Most Leland King Pin Box Models
Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plate’s wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #331730 fits most Leland models.
Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.
1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.
2) To ensure correct fit, make the necessary A, B and C measurements:
A: Measure the king pin plate from side-to-side. This is the most
important measurement. Be sure that this measurement is no more
than 1/16” less than 14".
B: Measure from the leading edge of the king pin to the leading edge of
the king pin plate, which should be 5 1/2".
C: Measure from the rear edge to the leading edge of the king pin plate which should be 12 1/4".
ALT Part Numbers: PLR 331730, 31-7222
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.

Brand:Pullrite

SKU:337-331730

UPC:816456010858

PULLRITE 331730 SUPERGLIDE CUSTOM PLATE KIT
PULLRITE 4444 ISR ADAPTER 20K OE CHEVY
Price: $698.80
You can be notified by email when this part becomes available for purchase.
Product Description: Pullrite 4444 20K OE Series Chevy/GMC ISR Adapter
Why be locked into one choice with your custom "prep package?"

PullRite has engineered a new OE Series adapter that works with your original equipment tow package! Designed to give you more choices, use this adapter with any ISR Series hitch! Centered over axle for a better tow and better handling,

This OE Series adapter breaks down into 4 individual pieces, uses 4 independent mounting posts, requires NO TOOLS!

More innovation, more choice, at a lower cost!
ALT Part Numbers: PLR 4444, 38-6731
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.

Brand:Pullrite

SKU:337-4444

UPC:816456011688

PULLRITE 4444 ISR ADAPTER 20K OE CHEVY