SCANSTRUT SPD-8-W DECKPOD-SLIM WHT UP TO 8" DISP
Price: $594.00
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: ScanStrut Compact Deck Pod - Up to 9" displays (slim back) - White
Solve the challenge of finding a level mounting surface to install your displays onto your boat.
Fully Adjustable -
Optimum Viewing Angle
Added Strength
Solve the challenge of finding a level mounting surface to install your displays onto your boat.
Fully Adjustable -
- Easy-to-release lever can be operated with one hand
- Swivel the pod, tilt to your requirements, then lock back into position
Optimum Viewing Angle
- An adjustable ball joint allows a range of movement and multiple mounting angles
Added Strength
- An inner bracing plate secures the Deck Pod base to the Pod and adds rigidity to the assembly
- Also eliminates potential damage from shock and vibration
ALT Part Numbers: SST SPD8W, 38-9823
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand:Scanstrut
SKU:922-SPD8W
UPC:5060114794283
SCANSTRUT TBH-10 SEAL-THRU BULKHEAD SEAL 10X7MM
Price: $49.00
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: ScanStrut Through Bulkhead Cable Seal
The best way of providing a waterproof through-bulkhead seal for multiple electrical cables. The range provides IP67 waterproof cable routing and anchoring for up to 10 cables and will fit to any bulkhead, from 3/8" - 1-3/8" thickness. Typical installation scenarios include sealing of windlass power and control cables through forward bulkheads or navigation equipment cables into aft lazarette lockers.
Molded in high strength nylon with an over molded internal seal, the product is quick and easy to fit. Fitting times are significantly shorter than any current products available and only one person is required to complete the installation, with access from only one side of the bulkhead.
The best way of providing a waterproof through-bulkhead seal for multiple electrical cables. The range provides IP67 waterproof cable routing and anchoring for up to 10 cables and will fit to any bulkhead, from 3/8" - 1-3/8" thickness. Typical installation scenarios include sealing of windlass power and control cables through forward bulkheads or navigation equipment cables into aft lazarette lockers.
Molded in high strength nylon with an over molded internal seal, the product is quick and easy to fit. Fitting times are significantly shorter than any current products available and only one person is required to complete the installation, with access from only one side of the bulkhead.
ALT Part Numbers: SST TBH10, 38-9825
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand:Scanstrut
SKU:922-TBH10
UPC:5060114793903
SCANSTRUT TBH-4 SEAL-THRU BULKHEAD SEAL 4X16MM
Price: $49.00
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: ScanStrut Through Bulkhead Cable Seal
The best way of providing a waterproof through-bulkhead seal for multiple electrical cables. The range provides IP67 waterproof cable routing and anchoring for up to 10 cables and will fit to any bulkhead, from 3/8" - 1-3/8" thickness. Typical installation scenarios include sealing of windlass power and control cables through forward bulkheads or navigation equipment cables into aft lazarette lockers.
Molded in high strength nylon with an over molded internal seal, the product is quick and easy to fit. Fitting times are significantly shorter than any current products available and only one person is required to complete the installation, with access from only one side of the bulkhead.
The best way of providing a waterproof through-bulkhead seal for multiple electrical cables. The range provides IP67 waterproof cable routing and anchoring for up to 10 cables and will fit to any bulkhead, from 3/8" - 1-3/8" thickness. Typical installation scenarios include sealing of windlass power and control cables through forward bulkheads or navigation equipment cables into aft lazarette lockers.
Molded in high strength nylon with an over molded internal seal, the product is quick and easy to fit. Fitting times are significantly shorter than any current products available and only one person is required to complete the installation, with access from only one side of the bulkhead.
ALT Part Numbers: SST TBH4, 38-9826
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand:Scanstrut
SKU:922-TBH4
UPC:5060114793897
SCANSTRUT APT-GPS-01 CENTRAL ANTENNA BAR (1" X 14 T
Price: $160.00
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: ScanStrut Central GPS/VHF Antenna Bar
Optional GPS/VHF Antenna Bar for some PowerTower mounts. Fabricated with 6082 Aluminum and finished with a polyester powder coat for a durable, white gloss finish.
Optional GPS/VHF Antenna Bar for some PowerTower mounts. Fabricated with 6082 Aluminum and finished with a polyester powder coat for a durable, white gloss finish.
ALT Part Numbers: SST APTGPS01, 38-9804
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand:Scanstrut
SKU:922-APTGPS01
UPC:5060114795433
SCANSTRUT APT-150-01 ALUMINIUM POWERTOWER 6"
Price: $369.99
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: ScanStrut 6" Aluminum Powertower®, White
- Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.
- Antenna fastens to PowerTower using own mounting bolts.
- Pre-drilled mounting holes for easy installation.
- Internal cable management
- Watertight base seal included; no need for messy sealant
- White powder coated
- 25° Aft leaning
- Internally mounted cable seal
ALT Part Numbers: SST APT15001, 38-9801
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand:Scanstrut
SKU:922-APT15001
UPC:5060114795402
SCANSTRUT APT-250-01 ALUMINIUM POWERTOWER 10"
Price: $379.99
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: ScanStrut 10" Aluminum Powertower®, White
- Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.
- Antenna fastens to PowerTower using own mounting bolts.
- Pre-drilled mounting holes for easy installation.
- Internal cable management
- Watertight base seal included; no need for messy sealant
- White powder coated
- 25° Aft leaning
- Internally mounted cable seal
ALT Part Numbers: SST APT25001, 38-9802
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand:Scanstrut
SKU:922-APT25001
UPC:5060114795419
SCANSTRUT DS-MULTI DECK SEAL-MULTI
Price: $75.00
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: ScanStrut Multi Cable Aluminum Deck Seal
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
ALT Part Numbers: SST DSMULTI, 38-9811
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand:Scanstrut
SKU:922-DSMULTI
UPC:5060114793309
SCANSTRUT DS16-S DECK SEAL-MINI
Price: $52.50
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: ScanStrut Mini Stainless Cable Deck Seal
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
ALT Part Numbers: SST DS16S, 38-9809
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand:Scanstrut
SKU:922-DS16S
UPC:5060114792777
SCANSTRUT DS30-S DECK SEAL-MEDIUM
Price: $76.00
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: ScanStrut Stainless Cable Deck Seal, Medium
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
ALT Part Numbers: SST DS30S, 38-9810
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand:Scanstrut
SKU:922-DS30S
UPC:5060114792814
SCANSTRUT PT3010 POWER TOWER BASE WEDGE 4 DEG
Price: $142.00
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: ScanStrut PT3010 4° Radar Base Wedge for PowerTowers
- Angles your radar down 4° below horizontal providing a level horizon for your radar when the boat is bow's up underway
- Fits under PowerTower with a base seal to ensure a watertight install
ALT Part Numbers: SST PT3010, 38-9812
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand:Scanstrut
SKU:922-PT3010
UPC:5060114790438
