PULLRITE 331705 SUPERGLIDE KIT LIPPERT LONG/MD
Price: $173.39
Product Description: Pullrite 331705 QuickConnect Capture Plate for Lippert King Pin Box Models Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plates wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #331705 fits Lippert 1621, 1116, and 1716 models.
Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.
1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.
2) To ensure correct fit, make the necessary A, B and C measurements:
A: Measure the king pin plate from side-to-side. This is the most
important measurement. Be sure that this measurement is no more
than 1/16 less than 13-1/4".
B: Measure from the leading edge of the king pin to the leading edge of
the king pin plate, which should be 3-3/8".
C: Measure from the rear edge to the leading edge of the king pin plate which should be 8-7/8".
Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.
1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.
2) To ensure correct fit, make the necessary A, B and C measurements:
A: Measure the king pin plate from side-to-side. This is the most
important measurement. Be sure that this measurement is no more
than 1/16 less than 13-1/4".
B: Measure from the leading edge of the king pin to the leading edge of
the king pin plate, which should be 3-3/8".
C: Measure from the rear edge to the leading edge of the king pin plate which should be 8-7/8".
ALT Part Numbers: PLR 331705, 31-7218
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Pullrite
SKU:337-331705
UPC:816456010780
PULLRITE 331757 QUICKCONNECT KIT
Price: $173.39
Product Description: Pullrite 331757 Quick Connect Capture Plate for Trailair Tri Glide Airbag/Shock King Pin Box Models Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plates wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #331757 fits Trailair Tri Glide Airbag/Shock Pin Box models.
Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.
1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.
2) To ensure correct fit, make the necessary A, B and C measurements:
A: Measure the king pin plate from side-to-side. This is the most
important measurement. Be sure that this measurement is no more
than 1/16 less than 12 3/4".
B: Measure from the leading edge of the king pin to the leading edge of
the king pin plate, which should be 5 15/16".
C: Measure from the rear edge to the leading edge of the king pin plate. Part #331757 accommodates all sizes.
Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.
1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.
2) To ensure correct fit, make the necessary A, B and C measurements:
A: Measure the king pin plate from side-to-side. This is the most
important measurement. Be sure that this measurement is no more
than 1/16 less than 12 3/4".
B: Measure from the leading edge of the king pin to the leading edge of
the king pin plate, which should be 5 15/16".
C: Measure from the rear edge to the leading edge of the king pin plate. Part #331757 accommodates all sizes.
ALT Part Numbers: PLR 331757, 31-7227
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Pullrite
SKU:337-331757
UPC:816456010902
RV DESIGNER E353 KNOB-AWNING SHORT 2PK
Price: $15.29
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: RV Designer E353 Awning Knobs, 2/pk For Faulkner and A&E awnings.
ALT Part Numbers: RVD E353, 31-8274
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Rv Designer
SKU:350-E353
UPC:601320983532
RV DESIGNER E287 SCREEN DOOR LATCH-AMERI LT HND
Price: $37.09
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: RV Designer E287 Black Left Hand Amerimax RV Screen Door Latch Left hand RV screen door latch. Most RV doors are Right Hand. 3-1/8" Center to Center.
ALT Part Numbers: RVD E287, 31-8259
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Rv Designer
SKU:350-E287
UPC:601320982870
RV DESIGNER E365 WATERPROOF OUTLET COVER-WHITE
Price: $25.39
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: RV Designer Weatherproof Snap Cover Plate, White Weatherproof cover plate for AC receptacles.
ALT Part Numbers: RVD E365, 31-8277
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Rv Designer
SKU:350-E365
UPC:601320113656
RV DESIGNER E363 HVY DTY TRIM 1INX25' COL WHT
Price: $17.19
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: RV Designer E363 Insert Trim, 1" x 25', Heavy Duty Colonial White Replace cracked and stained trim for a better look and longer life. Durable and easy to install.
Heavy Duty fits standard 1" molding and is thicker material that lasts longer than standard trim.
Heavy Duty fits standard 1" molding and is thicker material that lasts longer than standard trim.
ALT Part Numbers: RVD E363, 31-8276
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Rv Designer
SKU:350-E363
UPC:601320983631
RV DESIGNER E361 HVY DTY TRIM 1INX25' WHT
Price: $17.19
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: RV Designer E361 Insert Trim, 1" x 25', Heavy Duty White Replace cracked and stained trim for a better look and longer life. Durable and easy to install.
Heavy Duty fits standard 1" molding and is thicker material that lasts longer than standard trim.
Heavy Duty fits standard 1" molding and is thicker material that lasts longer than standard trim.
ALT Part Numbers: RVD E361, 31-8275
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Rv Designer
SKU:350-E361
UPC:601320983617
RV DESIGNER E285 SCREEN DOOR LATCH-AMERIMAX-RT
Price: $37.09
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: RV Designer E285 Black Right Hand Amerimax RV Screen Door Latch Right hand RV screen door latch. Most RV doors are Right Hand. 3-1/8" Center to Center.
ALT Part Numbers: RVD E285, 31-8258
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Rv Designer
SKU:350-E285
UPC:601320982856
RV DESIGNER E371 WTR.HEATER CAM LOCK(2PK.)
Price: $14.19
Not In StockMay be available soon with price change.
Item may be special order or out of stock. Please call 321-952-1303 or Contact Us for price and availability.
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description:
ALT Part Numbers: RVD E371, 31-8279
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Rv Designer
SKU:350-E371
UPC:601320983716
RV DESIGNER E369 HVY DTY TRIM 1INX25' BLACK
Price: $18.69
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: RV Designer E369 Insert Trim, 1" x 25', Heavy Duty Black Replace cracked and stained trim for a better look and longer life. Durable and easy to install.
Heavy Duty fits standard 1" molding and is thicker material that lasts longer than standard trim.
Heavy Duty fits standard 1" molding and is thicker material that lasts longer than standard trim.
ALT Part Numbers: RVD E369, 31-8278
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Rv Designer
SKU:350-E369
UPC:601320983693