JR PRODUCTS GSNI-5100-30 BLK NITRIDE SHAFT GAS SPRINGS
Price: $29.46
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: JR Products Hardline Black Nitride Shaft Gas Spring Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
ALT Part Numbers: JRP GSNI510030, 31-8022
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Jr Products
SKU:342-GSNI510030
UPC:756815005098
THETFORD 32613 PREMIUM BUG BUST 32 OZ.
Price: $8.37
Product Description: Thetford 32613 Premium Bug Bust, 32 oz. Ultra-Concentrated Pre-Measured Doses - Just Add Water!
- Concentrated wash and wax in one easy step
- Dissolves quickly & produces high-foam action
- Single dose gets it right every time no mess or wasted product
ALT Part Numbers: THE 32613, 31-3361
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Thetford
SKU:363-32613
UPC:028985326137
PULLRITE 3117 12K SUPERRAIL KIT CHEVY
Price: $843.29
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Pullrite 3117 Traditional Series SuperRail #3100 Mounting Kit for 2007-2016 Chevy GMC 1500 (5'8" Bed) Pickup Trucks #3100 SuperRail Kits fit 5-1/2' bed trucks. Use only with #3100 SuperGlide. Includes removable SuperRails & posts, mounting brackets & hardware. The #3100 features a totally removable baserail design. Features clean bed technology.
ALT Part Numbers: PLR 3117, 31-7211
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Pullrite
SKU:337-3117
UPC:816456010056
PULLRITE 3114 99-'04 H.D./L.D.CHEV. SUPER
Price: $843.29
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Pullrite 3114 Traditional Series SuperRail #3100 Mounting Kit for 2004-2007 Chevy GMC 1500 (5'8" Bed) Pickup Trucks #3100 SuperRail Kits fit 5-1/2' bed trucks. Use only with #3100 SuperGlide. Includes removable SuperRails & posts, mounting brackets & hardware. The #3100 features a totally removable baserail design. Features clean bed technology.
ALT Part Numbers: PLR 3114, 31-7210
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Pullrite
SKU:337-3114
UPC:816456010032
HENG'S 12009 VENT PILLOW
Price: $17.29
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Leisuretime 12009 Thermal Insulation Plug for RV Roof Vent Compresses to fit all makes of roof vents. Adds 3" of insulation to keep light, heat and condensation out and cool air in. Measures 14" x 14".
ALT Part Numbers: LTP 12009, 32-4986
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Heng's
SKU:518-12009
UPC:632500120096
HENG'S 15068 AIR CONDITIONING GASKET SEAL
Price: $34.09
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Leisure Time 15068 Universal Gasket Seal for RV Roof Air Conditioner The universal air conditioner roof gasket package is perfect for replacement of a leaking, damaged roof seal. The roof gasket should be replaced each time the air conditioner is removed for service or repair.
ALT Part Numbers: LTP 15068, 35-0130, 35-7633
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Heng's
SKU:518-15068
UPC:632500150680
HENG'S 60030 SPRAY N SEAL16 OZ.
Price: $35.39
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description:
ALT Part Numbers: LTP 60030, 32-4992
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Heng's
SKU:518-60030
UPC:632500600307
PULLRITE 331758 QUICK CONNECT CAPTURE KIT
Price: $173.39
Product Description: Pullrite 331758 Quick Connect Capture Plate for Most Trailair Airbag/Shock King Pin Box Models Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plates wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #331758 fits Most Trailair Airbag/Shock Pin Box models.
Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.
1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.
2) To ensure correct fit, make the necessary A, B and C measurements:
A: Measure the king pin plate from side-to-side. This is the most
important measurement. Be sure that this measurement is no more
than 1/16 less than 13 3/8".
B: Measure from the leading edge of the king pin to the leading edge of
the king pin plate, which should be 7 3/8".
C: Measure from the rear edge to the leading edge of the king pin plate which should be 13 1/2".
Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.
1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.
2) To ensure correct fit, make the necessary A, B and C measurements:
A: Measure the king pin plate from side-to-side. This is the most
important measurement. Be sure that this measurement is no more
than 1/16 less than 13 3/8".
B: Measure from the leading edge of the king pin to the leading edge of
the king pin plate, which should be 7 3/8".
C: Measure from the rear edge to the leading edge of the king pin plate which should be 13 1/2".
ALT Part Numbers: PLR 331758, 31-7228
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Pullrite
SKU:337-331758
UPC:816456010919
PULLRITE 331704 SUPERGLIDE KIT LIPPERT LG.1621
Price: $173.39
Product Description: Pullrite 331704 QuickConnect Capture Plate for Lippert King Pin Box Models Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plates wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #331704 fits Lippert 1621.
Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.
1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.
2) To ensure correct fit, make the necessary A, B and C measurements:
A: Measure the king pin plate from side-to-side. This is the most
important measurement. Be sure that this measurement is no more
than 1/16 less than 12 3/4".
B: Measure from the leading edge of the king pin to the leading edge of
the king pin plate, which should be 3 3/8".
C: Measure from the rear edge to the leading edge of the king pin plate which should be 8 7/8".
Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.
1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.
2) To ensure correct fit, make the necessary A, B and C measurements:
A: Measure the king pin plate from side-to-side. This is the most
important measurement. Be sure that this measurement is no more
than 1/16 less than 12 3/4".
B: Measure from the leading edge of the king pin to the leading edge of
the king pin plate, which should be 3 3/8".
C: Measure from the rear edge to the leading edge of the king pin plate which should be 8 7/8".
ALT Part Numbers: PLR 331704, 31-7217
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Pullrite
SKU:337-331704
UPC:816456010773
PULLRITE 3123 SUPERRAIL MOUNTING KIT FORD
Price: $848.69
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Pullrite 3123 Traditional Series SuperRail #3100 Mounting Kit for 2015-2017 Ford F150 Pickup Trucks #3100 SuperRail Kits fit 5-1/2' bed trucks. Use only with #3100 SuperGlide. Includes removable SuperRails & posts, mounting brackets & hardware. The #3100 features a totally removable baserail design. Features clean bed technology.
ALT Part Numbers: PLR 3123, 37-6076
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Pullrite
SKU:337-3123
UPC:816456011633