Product Search

Product Description: FulTyme RV 1189 LED Porch Light, Yellow Light/ Black Housing w/Switch

• Snap-on Acrylic lens
• Durable Plastic housing
• Hard wired with separate ground wire
• On/off switch built in

Product Description: FulTyme RV 3998 Premium RV Holding Tank Treatment Drop-INs™, Pine Scent Treatment features a Bacteria/ Enzyme formula to digest waste and break down tissue for easy biodegradation. Natural formulation digests waste, tissue, fats and proteins. Activates only in the presence of material requiring digestion. Advanced formula is stable, with a long shelf life and is not temperature sensitive. Also contains a buffering agent to prevent acid formation and septic odors. This product harnesses the natural process by which nature digests waste. Environmentally friendly and biodegradable. Fresh pine scent. Just one drop-in treats up to a 40 gallon tank.

Product Description: Lippert 806621 Thin Shade™ Complete Window Kit, Black Kit includes a tinted glass window PLUS a uniquely designed compact, horizontal blind that fits right into your window frame - allowing you to go in and out of your door as usual. Kit comes complete with the hardware and accessories needed to install the window, frame, and blind. All you need is a screwdriver.

• Uniquely designed blind embedded in frame
• Blocks out sun and keeps inside temps cool
• Added privacy
• Easy to adjust horizontal blind
• Kit includes: Tinted glass window, black exterior and interior window frame, horizontal blind, and hardware

Product Description: Valterra DG65429VP Slim Line Single LED Dome Light w/2-Way Switch, 12V This slim line single pancake LED light fixture features our SMD 18 diode 5500 Kelvin or bright white bulb for superior light output. Great for new installation or repacement fixtures, this LED is surface mount and easy to install with a 2 wire connection. To cover up old square style fixtures, use part 52551 (bezel) in conjunction with this item.

Product Description: Valterra DG52723VP LED Surface Mt. Porch Light w/Switch, Rectangular, White w/Clear Lens Surface Mount LED Porch Light. Features snap in plastic lens and 175 lumens of bright white output. Easy to install and comes with our standard 5 year warranty. 6" x 2". Daylight 5500K/175 lumen/.097 Amp.

Product Description: Valterra DG52724VP LED Surface Mt. Porch Light w/o Switch, Rectangular, White w/Clear Lens Surface Mount LED Porch Light. Features snap in plastic lens and 175 lumens of bright white output. Easy to install and comes with our standard 5 year warranty. 6" x 2". Daylight 5500K/175 lumen/.097 Amp.

Product Description: JR Products Hardline Black Nitride Shaft Gas Spring Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see “A” in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see “C” in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.

Product Description: JR Products Hardline Black Nitride Shaft Gas Spring Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see “A” in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see “C” in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.