JR PRODUCTS 00115 5/8IN THUMB COMPARTMENT LOCK
Price: $14.23
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: JR Products 5/8" Compartment Door Thumb Lock
- Original replacement
- Universal fit with flat and offset blades
- Automotive style lock for a longer life
- Weather resistant
- Lifetime warranty
ALT Part Numbers: JRP 00115, 31-7316
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Jr Products
SKU:342-00115
UPC:756815001151
JR PRODUCTS S-23-10-A ROUND CABLE HATCH POLAR WHITE
Price: $13.88
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: JR Products S2310A Cable Hatch, Round Polar White No metal parts that will rust or corrode. For use with a 30 Amp cord only.
ALT Part Numbers: JRP S2310A, 31-8053
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Jr Products
SKU:342-S2310A
UPC:756815006002
JR PRODUCTS HTH-A HOLDING TANK HEATER
Price: $180.55
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: JR Products HTH-A Dual Voltage RV Holding Tank Heater
- Use on either fresh water or septic tank
- Dual voltage ready for 12V and 110V applications
- Thermostatically controlled and active at 34° F
- 24 ground wire
- Draws approximately 1 Amp AC and 10 Amps DC
- Multiple heaters may be used where needed
ALT Part Numbers: JRP HTHA, 31-8040
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Jr Products
SKU:342-HTHA
UPC:756815006194
JR PRODUCTS GSNI-7145 GAS SPRING
Price: $37.05
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: JR Products Hardline Black Nitride Shaft Gas Spring Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
ALT Part Numbers: JRP GSNI7145, 31-8037
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Jr Products
SKU:342-GSNI7145
UPC:756815005272
JR PRODUCTS GSNI-6687 GAS SPRING
Price: $37.05
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: JR Products Hardline Black Nitride Shaft Gas Spring Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
ALT Part Numbers: JRP GSNI6687, 31-8036
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Jr Products
SKU:342-GSNI6687
UPC:756815005265
JR PRODUCTS GSNI-5300-60 BLK NITRIDE SHAFT GAS SPRINGS
Price: $32.32
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: JR Products Hardline Black Nitride Shaft Gas Spring Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
ALT Part Numbers: JRP GSNI530060, 31-8033
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Jr Products
SKU:342-GSNI530060
UPC:756815005067
PREST-O-FIT 2-2001 PATIO RUG STAKES 6PK
Price: $10.99
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description:
ALT Part Numbers: PSF 22001, 31-7028
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Prest-o-fit
SKU:330-22001
UPC:764842220018
JR PRODUCTS 07-30345 Z REGULATOR BRACKET
Price: $19.50
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Z Bracket
- Used for mounting LP gas regulators on flat surfaces
- Normally uses two (2) for installation
ALT Part Numbers: JRP 0730345, 32-9600
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Jr Products
SKU:342-0730345
UPC:756815624459
JR PRODUCTS 07-30355 SQUARE REGULATOR BRACKET
Price: $27.76
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Square Regulator Bracket
- Used for mounting regulator on flat surfaces
- Includes regulator screws
- Replaces the use of two (2) Z brackets
ALT Part Numbers: JRP 0730355, 32-9601
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Jr Products
SKU:342-0730355
UPC:756815624466
JR PRODUCTS 07-30335 LOW PRESSURE REGULATOR
Price: $30.63
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: JR Products 07-30335 Low Pressure 175,000 BTU/HR Regulator for Portable RV Appliances
- 1/4" FPT Inlet x 3/8" FPT Outlet
- Drip lip vent above outlet
- 175,000 BTU/Hr based on 25 PSIG inlet & 9" W.C.
- Primary use, portable appliances
ALT Part Numbers: JRP 0730335, 32-9599
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Jr Products
SKU:342-0730335
UPC:756815624442