Product Search

Product Description: RAM 1.5" Ball Mount for Humminbird Helix 5 Powder coated marine grade aluminum mount. The round 2.5" diameter round base (Universal AMPs Hole Pattern), short double socket arm and 1.5" × 3" rectangular base. The rectangular base contains four holes with a center to center pattern of 1" × 2.5". For most applications, mount will support up to 10 pounds.

Product Description: RAM Standard Length Double Socket Arm for 1.5" Balls The RAM-201, standard length double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.

Dimensions:
Overall Length: 5.625"
Socket-To-Socket Length: 4.5"

Product Description: 2.25" Diameter Ball Mount A 3.68" diameter round base, double socket arm and 11" x 3" rectangular plate. The round base has pre-drilled holes, including two holes at 180° and three holes at 120°. The plate has different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.

Product Description: Ram R-A-M^® Mounting System, Short Arm The arm has a socket at both ends that accommodates ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. The round base has pre-drilled holes.

Product Description: Ram R-A-M^® Mounting System, Standard Arm The arm has a socket at both ends that accommodates ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. The round base has pre-drilled holes.

Product Description: RAM Universal Finger-Grip™ Phone/Radio Cradle The RAM-HOL-UN4U is designed to hold a large amount of cell phones and electronic devices. The cradle comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the cradle includes a back plate that adds support to the device being held by the mount. The perfect solution that is the best phone mount, car mount, motorcycle mount and can be used with several other phone accessories including samsung accessories and lg accessories. The spine plate contains the universal AMPs and 1.5" x 2" hole patterns.

Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.

Product Description: RAM Universal X-Grip^® Large Phone/Phablet Cradle The RAM-HOL-UN10BU has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the X-Grip^® IV is the phablet cradle evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your phablet and become the most useful accessory in your vehicle.

The X-Grip^® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Cradle Dimensions
Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"

Product Description: Ram R-A-M^® Mounting System, 2.5" Round Ball Base w/2.25" Ball The arm has a socket at both ends that accommodates ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. The round base has pre-drilled holes.

Product Description: RAM RAMD20225C202 2-1/4" Ball Mount for Humminbird Helix 9, 10, 12 Powder coated marine grade aluminum mount. The round plate contains two mounting holes at 180° and three mounting holes at 120°. The rectangular plate contains a 4-hole pattern of 1.5" × 4.5". The patented rubber ball and socket technology dampens shock and vibration, and allows for nearly infinite adjustability, So you can set your device at the perfect veiwing angle, while suited for any rugged environment. Weight capacity up to 15 lbs. Fits Humminbird Helix 9, Humminbird Helix 10, Humminbird Helix 12.

Product Description: RAM X-Grip^® Phone Mount Sometimes, it's all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip^® has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip^® is the cell phone cradle evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your phone and become the most useful accessory in your vehicle.

The X-Grip^® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Cradle Dimensions
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"