RAYMARINE T70161 EV400 SAIL AUTOPILOT NO DRIVE
Price: $4,038.78
Product Description: Raymarine EV-400 Inboard Autopilot - Sail_No Drive Pack Contains:
Designed for Evolution mechanical and hydraulic autopilot systems.
SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.
The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus.
The p70 / p70s autopilot control head is a push-button operation controller designed primarily for sailboats. Advanced LED backlighting offers low power consumption and delivers vibrant colour and contrast. Wide horizontal and vertical viewing angles ensure the display can be seen clearly from acute positions. The p70 / p70s control head features the LightHouse user interface and a start up wizard to help you configure the pilot quickly and easily.
ng Power Cable (0.4m)
1 x SeaTalkng Backbone Cable (5m)
1 x SeaTalkng Spur Cable (0.4m)
1 x SeaTalkng 5-way Connector Block
2 x SeaTalkng T-piece Connector
2 x SeaTalkng Terminator
- EV1 Sensor Core
Designed for Evolution mechanical and hydraulic autopilot systems.
SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.
- Actuator Control Unit-400
The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus.
- p70 / p70s Autopilot Control Head (Sail)
The p70 / p70s autopilot control head is a push-button operation controller designed primarily for sailboats. Advanced LED backlighting offers low power consumption and delivers vibrant colour and contrast. Wide horizontal and vertical viewing angles ensure the display can be seen clearly from acute positions. The p70 / p70s control head features the LightHouse user interface and a start up wizard to help you configure the pilot quickly and easily.
- Evolution Cabling Kit - Contains:
ng Power Cable (0.4m)
1 x SeaTalkng Backbone Cable (5m)
1 x SeaTalkng Spur Cable (0.4m)
1 x SeaTalkng 5-way Connector Block
2 x SeaTalkng T-piece Connector
2 x SeaTalkng Terminator
ALT Part Numbers: RAY T70161, 39-5206
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Raymarine
SKU:152-T70161
UPC:723193774359
RAYMARINE T70226 I70 SYSTEM WIND/SPEED/DEPTH 9M
Price: $1,856.12
Product Description: Raymarine T70226 i70s Instrument Pack Instrument System Pack for Existing NMEA 2000 installations.
T70226
T70226
- i70 display
- iTC-5 converter
- Standard wind transducer
- DST800 transducer
- Backbone Cable 9M
- Inline Terminator
- Power Cable
- Owner's manual
ALT Part Numbers: RAY T70226, 39-5191
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Raymarine
SKU:152-T70226
UPC:723193788257
BOSS AUDIO SYSTEMS MC520B SPEAKERS MC BT AM-FM CHR 1PR
Price: $191.99
Not In StockMay be available soon with price change.
Item may be special order or out of stock. Please call 321-952-1303 or Contact Us for price and availability.
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Boss 600W All-Terrain Speaker & Amplifier System w/Fm Tuner
- Chrome 3" Full Range Speakers
- 600 Watt Max Amplifier with Wireless Keychain Remote
- Bluetooth Audio Streaming
- FM radio, USB, SD and 3.5mm Aux Inputs
- Includes Mounting Brackets to fit 0.75" to 1.25" Handle Bars
- Great for 12V Motorcycles, Scooters and ATV's
ALT Part Numbers: BOS MC520B, 39-4741
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Boss Audio Systems
SKU:153-MC520B
UPC:791489124348
BOSS AUDIO SYSTEMS MR62B SPEAKERS 6.5" 200W 1PR/PK
$96.99 Sale Price: $79.99
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Boss 6-1/2" Marine Speakers, Black, pr.
- Weather Proof Full Range 6.5" 2-way Speaker
- 200 Watts MAX 100 Watts RMS Power Handling per Pair
- 80 Hz to 20 kHz Frequency Response and 90dB Sensitivity
- Polypropylene Woofer Cone and Treated Cloth Surround
- 1 Tweeter Per Speaker
ALT Part Numbers: BOS MR62B, 39-2993
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Boss Audio Systems
SKU:153-MR62B
UPC:791489124447
GARMIN MSD913PPLUS VANCOVER ISLAND PLAT PLUS
Price: $359.34
Product Description: Platinum+ On Micro SD, Vancouver Island Head out with confidence! All the same marine content and advanced features found in Navionics+ are augmented by satellite imagery with SonarChart Shading, relief shading and sonar imagery chart overlays, 3D View and panoramic photos to provide the ultimate situational awareness. Designed with the most demanding boaters and serious anglers in mind, these additional viewing options can be used on a growing number of GPS plotters. Quickly target the best spots and catch more fish. Daily updates and advanced features are included for 1 year and provide you with Dock-to-dock Autorouting, SonarChart™ Live, Advanced Map Options and Plotter Sync. Simply plug your card into your computer and register at Navionics.com.
- 1 contours inshore and nearshore
- 3 and 6 contours offshore beyond 90
- Daily updates and advanced features for 1 year
- Preloaded with Nautical Chart and SonarChart™ chart layers; Community Edits are downloadable
- Enjoy advanced features such as Dock-to-dock Autorouting1, SonarChart™ Live, Advanced Map Options and Plotter Sync
- Enhance the SonarChart™ contour map with sonar logs you collect
- Includes tides and currents, safety depth contours, navaids, coastal points of interest and port services information
- Check Navionics.com/compatibility
ALT Part Numbers: NAV MSD913PPLUS, 25-8150, 38-9023
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Garmin
SKU:155-MSD913PPLUS
UPC:821245913593
SHAKESPEARE ANTENNAS 6018-R 18FT PHASE III VHF ANTENNA
Price: $1,485.69
Not In StockMay be available soon with price change.
Item may be special order or out of stock. Please call 321-952-1303 or Contact Us for price and availability.
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Shakespeare 6018-R Phase III VHF Antenna Good communication over the VHF Marine Band depends on antenna height, quality and dB Gain. This high performing Phase III™ marine antenna is a powerhouse providing all of those necessities in our rugged, high-strength, ethafoam spacer system, fiberglass radome for stability in high seas, high winds and high speeds.
- Silver-plated outer conductor, copper inner conductor
- Stainless steel mounting sleeve
- Type SO-239 connector inside mounting sleeve for easy mounting and dismounting for stowage
- Suggested mount: Shakespeare® Style 409-R or 410-R Mounting Kit
- Two sections: Base 110", Tip 110"
- Gain: 8dB
- Boat Length: 22'+
ALT Part Numbers: SHA 6018R, 39-5971
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Shakespeare Antennas
SKU:167-6018R
UPC:719441200657
SHAKESPEARE ANTENNAS 6235-R 8FT PHASE III AM/FM ANTENNA
Price: $439.09
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: 6235-R 8' Phase III AM/FM Antenna Our master craftsmen take AM/FM reception to new heights with this hand soldered, hand assembled and hand finished AM/FM antenna. The quality build of this 8 antenna ensure high performance and durability. The high-gloss polyurethane finish protects the fiberglass from yellowing under UV rays, providing a lasting look of beauty for years to come.
ALT Part Numbers: SHA 6235R, 39-5973
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Shakespeare Antennas
SKU:167-6235R
UPC:719441200671
RAM MOUNTS RAM-D-111-C-KNOB9H RAM MOUNT FOR LOWRANCE HDS 16
$194.49 Sale Price: $176.49
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: RAM 2-1/4" Ball Mount W/3" X 11" Base & 3-3/4" Base w/Hi-Torq⢠Wrench A 3.68" diameter round base, double socket arm and 11" x 3" rectangular plate. The round base has pre-drilled holes, including two holes at 180° and three holes at 120°. The plate has different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
Includes the RAM Hi-Torq™ Wrench; designed to give an extra tight grip with the knob on "D" size ball arms and mounts. Ideal when using the RAM mounts in cold weather or if you just want extra torgue.
Includes the RAM Hi-Torq™ Wrench; designed to give an extra tight grip with the knob on "D" size ball arms and mounts. Ideal when using the RAM mounts in cold weather or if you just want extra torgue.
ALT Part Numbers: RAM RAMD111CKNOB9H, 38-6476
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Ram Mounts
SKU:170-RAMD111CKNOB9H
UPC:793442937347
RAM MOUNTS RAM-D-115 UNIV MOUNT 9-12" FISHFINDERS
$167.99 Sale Price: $159.99
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: RAM RAMD115 Universal D Size Ball Mount For 9"-12" Fishfinders & Chartplotters A base with a 2.25" diameter D size ball, arm and a 6.25" x 2" marine electronic plate with a D size ball for larger devices. The plate contains different combinations of pre-drilled holes and is a direct fit for 9"-12" fishfinder gimbal brackets.
ALT Part Numbers: RAM RAMD115, 39-5980
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Ram Mounts
SKU:170-RAMD115
UPC:793442955617
RAM MOUNTS RAP-402U 4" RISER PLATE
$22.99 Sale Price: $20.49
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: RAM RAP402U Ram® Cable Manager For 4" Diameter Round Base Plates The RAM Cable Manager creates an integrated route for electrical wiring which cleanly covers installation holes. A great addition to any surface mounting application. The RAM Cable Manager is made of glass filled nylon which has the benefit of creating a barrier between the RAM Surface Mount and the attachment area; minimizing vibration while reducing fiberglass and gel-coat damage. This item will fit any of the 4" diameter round plates with a 3 hole pattern. Compatible with all 2.25" diameter ball bases that contain a three hole, 120° hole pattern.
Will not work with the AMPs hole pattern plates.
Will not work with the AMPs hole pattern plates.
ALT Part Numbers: RAM RAP402U, 35-0353
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Ram Mounts
SKU:170-RAP402U
UPC:793442944185