TACO METALS F16-0810-1 COMEONBOARD HANDLE RH VERS
Price: $432.25
Product Description: TACO Metals F16-0810-1 "Come On Board" Boarding Angled Handle TACO Marine's boarding handle is ideal for boats on the water where constant boarding is necessary with a large grabbing surface for comfort grip. The finger molded handle pipe design assures a more secure and comfortable grip. A two piece fixed mount design for easy storage. Packaged in mesh bag for easy drying if stored wet and to avoid scratching deck or storage surfaces on the boat.
- S/S Type-304
- Unique finger molded groove handle design for comfort grip
- 1-1/2" Diameter tube fits into standard 1-5/8" rod holders
- Multiple piece design for easy storage
ALT Part Numbers: TAC F1608101, 36-0132
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Taco Metals
SKU:236-F1608101
UPC:630838084899
SEA-DOG LINE 254218-1 STUD MNT HAND RAIL 18"
Price: $64.15
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: SeaDog 2542181 Stud Mount Flanged Grab Rail, Stainless, 19-3/8" The stud mounted grab rail features integral 5/16-18 threaded studs and installs with two 5/16-18 nuts (not included). Formed of 7/8 304 stainless steel for corrosion resistance, the design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive with no mounting hardware visible.
ALT Part Numbers: SDG 2542181, 36-0101
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Sea-dog Line
SKU:354-2542181
UPC:035514254120
SEA-DOG LINE 254512-1 LED STUD MNT HAND RAIL 12"
Price: $96.95
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: SeaDog LED 12V Stud Mount Hand Rail (6) Blue LED's Formed 304 Stainless 5/16" Fastener LED Stud Mount Hand Rails have six blue LED's in each mounting base piece and are shipped as three pieces - one handrail and two bases. 12 volt DC. Formed 304 stainless.
ALT Part Numbers: SDG 2545121, 36-0099
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Sea-dog Line
SKU:354-2545121
UPC:035514254366
SEA-DOG LINE 205246 BUTT HINGE W/BEARINGS 5"
Price: $97.95
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: SeaDog Butt Hinge with Bearings Commercial Pattern Investment Cast 316 Stainless 1/4" Fastener Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote rattle-free, silent movement and give the hinge a smoother action. The bearings also disburse the weight of the door compensating for heavier doors and increased use. Commercial ANSI templated screw hole pattern. Installs with eight 1/4" FH fasteners (not included).
ALT Part Numbers: SDG 205246, 36-0087
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Sea-dog Line
SKU:354-205246
UPC:035514205726
SEA-DOG LINE 040112 GALVANIZED CLEAT - 12 INCH
Price: $24.85
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Galvanized Cleat, 12" Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
ALT Part Numbers: SDG 040112, 08-0264
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Sea-dog Line
SKU:354-040112
UPC:035514040129
JR PRODUCTS GSNI-5300-50 BLK NITRIDE SHAFT GAS SPRINGS
Price: $32.32
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: JR Products Hardline Black Nitride Shaft Gas Spring Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
ALT Part Numbers: JRP GSNI530050, 31-8032
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Jr Products
SKU:342-GSNI530050
UPC:756815005111
JR PRODUCTS GSNI-5300-20 GAS SPING
Price: $32.32
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: JR Products Hardline Black Nitride Shaft Gas Spring Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
ALT Part Numbers: JRP GSNI530020, 31-8030
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Jr Products
SKU:342-GSNI530020
UPC:756815005302
JR PRODUCTS GSNI-5200-50 GAS SPING
Price: $31.17
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: JR Products Hardline Black Nitride Shaft Gas Spring Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
GSN5200-50 is used on truck caps.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
GSN5200-50 is used on truck caps.
ALT Part Numbers: JRP GSNI520050, 31-8027
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Jr Products
SKU:342-GSNI520050
UPC:756815005326
JR PRODUCTS GSNI-5200-60 GAS SPRING
Price: $31.17
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: JR Products Hardline Black Nitride Shaft Gas Spring Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
ALT Part Numbers: JRP GSNI520060, 31-8028
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Jr Products
SKU:342-GSNI520060
UPC:756815005258
JR PRODUCTS GSNI-5200-30 BLK NITRIDE SHAFT GAS SPRINGS
Price: $31.17
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: JR Products Hardline Black Nitride Shaft Gas Spring Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
ALT Part Numbers: JRP GSNI520030, 31-8025
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Jr Products
SKU:342-GSNI520030
UPC:756815005128