JR PRODUCTS GSNI-5200-40 BLK NITRIDE SHAFT GAS SPRINGS
Price: $31.17
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: JR Products Hardline Black Nitride Shaft Gas Spring Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
ALT Part Numbers: JRP GSNI520040, 31-8026
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Jr Products
SKU:342-GSNI520040
UPC:756815005074
JR PRODUCTS GSNI-4983-35 GAS SPRING
Price: $29.51
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: JR Products Hardline Black Nitride Shaft Gas Spring Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
ALT Part Numbers: JRP GSNI498335, 31-8018
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Jr Products
SKU:342-GSNI498335
UPC:756815005470
JR PRODUCTS GSNI-4032-28 GAS SPRING
Price: $31.16
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: JR Products Hardline Black Nitride Shaft Gas Spring Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
ALT Part Numbers: JRP GSNI403228, 31-8015
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Jr Products
SKU:342-GSNI403228
UPC:756815005456
JR PRODUCTS GSNI-2300-90 BLK NITRIDE SHAFT GAS SPRING
Price: $34.22
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: JR Products Hardline Black Nitride Shaft Gas Spring Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
ALT Part Numbers: JRP GSNI230090, 31-8013
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Jr Products
SKU:342-GSNI230090
UPC:756815005036
JR PRODUCTS GSNI-2300-120 BLK NITRIDE SHAFT GAS SPRINGS
Price: $34.22
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: JR Products Hardline Black Nitride Shaft Gas Spring Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
GAS SPRING FIT AND SELECTION
If you already have a gas spring installed, selecting a replacement can be as simple as A-B-C.
A. Measure the extended length from center mounting hole to center mounting hole (see A in diagram).
B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see C in diagram).
C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.
(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.)
SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
ALT Part Numbers: JRP GSNI2300120, 31-8010
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Jr Products
SKU:342-GSNI2300120
UPC:756815005029
SEA-DOG LINE 040108 GALVANIZED CLEAT - 8 INCH
Price: $12.35
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Galvanized Cleat, 8" Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
ALT Part Numbers: SDG 040108, 08-0262
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Sea-dog Line
SKU:354-040108
UPC:035514040105
SEA-DOG LINE 046108-1 ALUMINUM CLEAT(COUNTERSUNK)-8
Price: $16.75
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Sea-Dog 0461081 Open Base Aluminum Cleat - Flat Head, 8" Open base cleats feature die-cast aluminum construction. Large base distributes heavy loads evenly. Designed for use on docks or aluminum vessels. Countersunk for FH fasteners (not included).
ALT Part Numbers: SDG 0461081, 25-7916
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Sea-dog Line
SKU:354-0461081
UPC:035514046022
SEA-DOG LINE 046106-1 ALUMINUM CLEAT(COUNTERSUNK)-6
Price: $11.25
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Sea-Dog 0461061 Closed Base Aluminum Cleat - Flat Head, 6" Closed base cleats feature die-cast aluminum construction. Large base distributes heavy loads evenly. Designed for use on docks or aluminum vessels. Countersunk for FH fasteners (not included).
ALT Part Numbers: SDG 0461061, 24-2498
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Sea-dog Line
SKU:354-0461061
UPC:035514046015
SEA-DOG LINE 079710 ALUMINUM BOW EYE WELD ON
Price: $6.45
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Seadog Weldable Bow Eye, Cast Aluminum Weldable bow eyes are designed to add or replace a tie-down point on your boat's bow. Sand cast aluminum construction, for maximum corrosion resistance and durability. Weldable for permanent installations. Designed for use on aluminum vessels. Cast 356-T6 Aluminum. This alloy contains lead.
ALT Part Numbers: SDG 079710, 30-1497, 30-1498
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Sea-dog Line
SKU:354-079710
UPC:035514079112
SEA-DOG LINE 351320-1 STAINLESS CAST HOSE DECK
Price: $78.35
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Seadog 3513201 Gas Deck Fill for 1-1/2" Hose Constructed of corrosion resistant cast 316 stainless steel. Slotted cap requires a key to open and close. All fills and replacement caps (except waste) include attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.
1-1/2 hose versions feature 1-1/4" 11-1/2 NPSM straight cap threads.
1-1/2 hose versions feature 1-1/4" 11-1/2 NPSM straight cap threads.
ALT Part Numbers: SDG 3513201, 25-7922
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Sea-dog Line
SKU:354-3513201
UPC:035514351669
