LENCO 20158-001 BLADE ASSY-EDGE MOUNT 9X12
Price: $187.45
Product Description: Replacement Edge Mt. Trim Tab Blade, 9" x 12" Replacement Edge Mt. trim tab blade
ALT Part Numbers: LEN 20158001, 08-6663
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Lenco
SKU:622-20158001
UPC:874847003919
LENCO 30209-001D Y-HARNESS FOR DUAL STATION
Price: $68.04
Product Description: Y-Harness for Dual Station Installations Y-Harness for Dual Station Installations. See Lenco's AutoGlide website for application information.
ALT Part Numbers: LEN 30209001D, 28-3902, 28-3903
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Lenco
SKU:622-30209001D
UPC:874847005715
TURNING POINT PROPELLERS 11300101 HUB MASTRGRD RND 3.5"GC MER SZ
Price: $45.99
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Turning Point Propellers MasterGuard Installation Kit 11 (11300101)
Turning Point is the only company to offer MasterGuard® Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 33% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed (hub warranty on consumer use only - visit https://tpprops.com/warranty for details) . These hubs offer enhancedlower unit protection.
Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems.
Eliminate Hub System Vibration and Chatter: Innovative one piece design reduces the number of parts and eliminates failures commonly seen in multi-part hub systems.
Eliminate Hub Cracking and Failure: The glass reinforced high-tech polymer construction increases flexibility, eliminating potential material stress fractures.
Corrosion Resistant Materials: Premium corrosion resistant durable marine bronze splines.
Reduce Gear Shock and Engine/Drive Damage: MasterGuard hubs offer Shock absorbing high-tech polymer cushion with lower unit protection.
Easy to Install: Clear and easy step-by-step directions coupled with minimal parts makes installation easy.
- MasterGuard 10 Series Installation Kit for Engines with 3.5" Gearcase
- MasterGuard Installation/Hub Kits carry the only Lifetime Warranty in the WORLD!
- Hubs have no warranty restrictions, except for extreme commercial use.
- Saves a boater up to 33% on replacement propeller purchases (need to purchase prop housing only).
- One piece design: durable marine Bronze with Over Molded Glass Filled Nylon for Long Life.
- Re-useable after a Prop Strike.
- Warranted even if the prop is Destroyed! (consumer normal use only, not applicable on commercial applications)
- Enhanced lower unit protection.
- Utilizes a specially designed keyway system and a hi-tech polymer designed to absorb shift shock and harmful vibrations.
- The small diameter design allows for more exhaust flow and higher horsepower.
- Adapts to the OEM thrust washer and prop nut.
- Included accessories and parts: Hub assembly, prop nut spacer, installation instructions.
- Installation Kits for Colman®, Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, Nissan®, Parsun®, Suzuki®, Tohatsu®, & Yamaha® Outboards.
- Use with Hustler or Express Mach3 propeller housings for 25-75hp engines with 3.5" gearcase.
- See application chart for engine application information.
Turning Point is the only company to offer MasterGuard® Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 33% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed (hub warranty on consumer use only - visit https://tpprops.com/warranty for details) . These hubs offer enhancedlower unit protection.
Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems.
Eliminate Hub System Vibration and Chatter: Innovative one piece design reduces the number of parts and eliminates failures commonly seen in multi-part hub systems.
Eliminate Hub Cracking and Failure: The glass reinforced high-tech polymer construction increases flexibility, eliminating potential material stress fractures.
Corrosion Resistant Materials: Premium corrosion resistant durable marine bronze splines.
Reduce Gear Shock and Engine/Drive Damage: MasterGuard hubs offer Shock absorbing high-tech polymer cushion with lower unit protection.
Easy to Install: Clear and easy step-by-step directions coupled with minimal parts makes installation easy.
ALT Part Numbers: TUR 11300101, 26-7361
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Turning Point Propellers
SKU:708-11300101
UPC:652480200649
TURNING POINT PROPELLERS 1150 0800 HUB MASTRTORQ 4.75" HONDA
Price: $68.89
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Turning Point Propellers MasterGuard Installation Kit 508 (11500800) MasterGuard 500 Series Installation Kit for Engines with 4.25" or 4.75" Gearcases
Lifetime warranty for engines under 200hp with aluminum or stainless steel props and engines 200+hp with aluminum props only.
Turning Point is the only company to offer MasterGuard® Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 33% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed (hub warranty on consumer use only - visit https://tpprops.com/warranty for details) . These hubs offer enhancedlower unit protection.
Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems.
Eliminate Hub System Vibration and Chatter: Innovative one piece design reduces the number of parts and eliminates failures commonly seen in multi-part hub systems.
Eliminate Hub Cracking and Failure: The glass reinforced high-tech polymer construction increases flexibility, eliminating potential material stress fractures.
Corrosion Resistant Materials: Premium corrosion resistant durable marine bronze splines.
Reduce Gear Shock and Engine/Drive Damage: MasterGuard hubs offer Shock absorbing high-tech polymer cushion with lower unit protection.
Easy to Install: Clear and easy step-by-step directions coupled with minimal parts makes installation easy.
Lifetime warranty for engines under 200hp with aluminum or stainless steel props and engines 200+hp with aluminum props only.
- MasterGuard Installation/Hub Kits carry the only Lifetime Warranty in the WORLD!
- Hubs have no warranty restrictions, except for extreme commercial use.
- Saves a boater up to 33% on replacement propeller purchases (need to purchase prop housing only).
- One piece design: durable marine Bronze with Over Molded Glass Filled Nylon for Long Life.
- Re-useable after a Prop Strike.
- Warranted even if the prop is Destroyed! (consumer normal use only, not applicable on commercial applications)
- Enhanced lower unit protection.
- Warranted even if used in competitive propeller housings(Mercury, Michigan Wheel, Solas)
- Each kit contains a hub, thrust washer, and other hardware for installing Turning Point Express Mach3, Mach3 OS, Mach4, and Hustler propeller housings on most engines with 4.25" or 4.75" gearcase.
- Also used as a hub upgrade to fit Solas Rubex, Michigan Wheel XHS, and Mercury FloTorq propeller housings.
- Installation Kits for Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, & Yamaha® Outboards and Sterndrives.
- See application chart for engine application information.
Turning Point is the only company to offer MasterGuard® Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 33% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed (hub warranty on consumer use only - visit https://tpprops.com/warranty for details) . These hubs offer enhancedlower unit protection.
Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems.
Eliminate Hub System Vibration and Chatter: Innovative one piece design reduces the number of parts and eliminates failures commonly seen in multi-part hub systems.
Eliminate Hub Cracking and Failure: The glass reinforced high-tech polymer construction increases flexibility, eliminating potential material stress fractures.
Corrosion Resistant Materials: Premium corrosion resistant durable marine bronze splines.
Reduce Gear Shock and Engine/Drive Damage: MasterGuard hubs offer Shock absorbing high-tech polymer cushion with lower unit protection.
Easy to Install: Clear and easy step-by-step directions coupled with minimal parts makes installation easy.
ALT Part Numbers: TUR 11500800, 28-6596, 28-6597
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Turning Point Propellers
SKU:708-11500800
UPC:652480200656
TURNING POINT PROPELLERS 2143 1530 PROP HUSTLER 4BL AL13.5X15 RH
Price: $132.99
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Turning Point Propellers 21431530 Hustler Propeller 13.5x15, 4-Blade Aluminum, RH Rotation (Standard) Hustler® Aluminum Swept Cleaver 4 Blade Props for 40-150hp Engines with 4.25" Gearcases.
4 Blades That Re-wrote the Rules. The props that put the "four" in Perfourmance! These props re-wrote the rules, proving that you can run a 4-Blade that has:
- Unprecedented hole shot, lift, handling, ease of steering, and rough water stability.
- No top-end speed loss you experience with other manufacturers' 4 blade propellers keeps 3 blade top end speed.
- Lifts the entire boat higher out of the water.
By lifting the hull higher, boats tend to lose less speed when fully loaded versus a 3-Blade prop. With a lightly loaded boat, a 3-Blade is usually the faster prop for most applications. Alternatively when an application is loaded down with extra people and gear, a 3-Bladed prop can lose up to 3 MPH. This is because the hull is forced deeper into the water causing more wetted surface by the added weight. By lifting the hull higher the Turning Point 4 blade when fully loaded does not lose the top end speed compared to a 3-Blade propeller.
Turning Point Hustler aluminum props function just like Express stainless steel designs and run within 0.5MPH to 1MPH of each other most of the time. There are many reasons for this:
- Hustler props are produced from the same stainless steel geometry & drawing.
- Hustler is cast using the latest state-of-the-art squeeze casting technologies.
The competition does NOT use stainless steel blade geometry with no-blade-flex squeeze cast technology in their aluminum propellers. Competitive Die-Cast aluminum propellers significantly under perform when compared to stainless steel designs seen in the market.
The Huslter 4 blade series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older aluminum designs from the 70's, 80's, 90's, and '00's, and will outrun most newer props, including five blade ski props.
Squeeze Cast for Added Strength:
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.
Long Lasting Ultracoat™ Powder Coated Finish:
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
4 Blades That Re-wrote the Rules. The props that put the "four" in Perfourmance! These props re-wrote the rules, proving that you can run a 4-Blade that has:
- Unprecedented hole shot, lift, handling, ease of steering, and rough water stability.
- No top-end speed loss you experience with other manufacturers' 4 blade propellers keeps 3 blade top end speed.
- Lifts the entire boat higher out of the water.
By lifting the hull higher, boats tend to lose less speed when fully loaded versus a 3-Blade prop. With a lightly loaded boat, a 3-Blade is usually the faster prop for most applications. Alternatively when an application is loaded down with extra people and gear, a 3-Bladed prop can lose up to 3 MPH. This is because the hull is forced deeper into the water causing more wetted surface by the added weight. By lifting the hull higher the Turning Point 4 blade when fully loaded does not lose the top end speed compared to a 3-Blade propeller.
- Stainless steel performance at aluminum prices.
- 4 blade Swept Cleaver prop that has 3 blade top end speed with fast hole shot and unmatched handling.
- Tuned exhaust vents improve hole shot and "Best in class" reversibility.
- Squeeze casting adds strength that boosts performance.
- Protected by five-step powder-coated finish.
- Propellers fit Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, & Yamaha® Outboards and Sterndrives.
- Uses 500 series Installation/hub kits only-Sold separately.
- See application chart for engine application information and required Installation/hub kit part numbers.
Turning Point Hustler aluminum props function just like Express stainless steel designs and run within 0.5MPH to 1MPH of each other most of the time. There are many reasons for this:
- Hustler props are produced from the same stainless steel geometry & drawing.
- Hustler is cast using the latest state-of-the-art squeeze casting technologies.
The competition does NOT use stainless steel blade geometry with no-blade-flex squeeze cast technology in their aluminum propellers. Competitive Die-Cast aluminum propellers significantly under perform when compared to stainless steel designs seen in the market.
The Huslter 4 blade series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older aluminum designs from the 70's, 80's, 90's, and '00's, and will outrun most newer props, including five blade ski props.
Squeeze Cast for Added Strength:
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.
Long Lasting Ultracoat™ Powder Coated Finish:
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
ALT Part Numbers: TUR 21431530, 28-6594, 28-6595
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Turning Point Propellers
SKU:708-21431530
UPC:652480200670
SPORT MARINE TECHNOLOGIES 74644 HYDRO FOIL SE SPORT 400 BLACK
Price: $137.99
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: SE Sport 400 Hydrofoil for 40 HP & Up Drill-Free or Drill option
High Performance Hydrofoils streamlined for speed. The SE Sport will improve handling and provide better maneuverability with a smoother ride. Features Turbo Trac to enhance thrust and control. Crescent shaped surface quickly funnels water for more thrust-cutting planing time for the quickest hole shot. Cuts planing time dramatically and keeps the boat on plane at lower speeds while saving on fuel and providing better stability. Features high strength copolymer construction. Stainless steel hardware included. All hydrofoils and the Sport Clip are 100% molded, crafted, and made in USA.
Recommended for outboards and sterndrives 40 to unlimited horse power. Exclusion: Volvos with the exhaust through the cavitation plate. For these sterndrives we recommend the Sport 300. Both drill (2 hold or 4 hole) and drill-free stainless hardware included. Simple and quick drill-free mounting with a common wrench or socket and screw driver. Proven Disk-Grips™ hardware for the drill-free attachment will not screw into or damage the edge of your cavitation plate. Does not require the Sport Clip for a drill-free installation. Dimension 16"x17".
Trim Covers™ for SE Sport 400: Available in Red and Blue, these covers offer an alternative to the standard silver which accompanies the SE Sport 400.
High Performance Hydrofoils streamlined for speed. The SE Sport will improve handling and provide better maneuverability with a smoother ride. Features Turbo Trac to enhance thrust and control. Crescent shaped surface quickly funnels water for more thrust-cutting planing time for the quickest hole shot. Cuts planing time dramatically and keeps the boat on plane at lower speeds while saving on fuel and providing better stability. Features high strength copolymer construction. Stainless steel hardware included. All hydrofoils and the Sport Clip are 100% molded, crafted, and made in USA.
- Reduces or eliminates porpoising, cavitation, chine walking and deep-V wander
- Sleek shape complements today's new boat designs
- Silver trim covers all securing hardware
- Manufacturer's lifetime warranty
Recommended for outboards and sterndrives 40 to unlimited horse power. Exclusion: Volvos with the exhaust through the cavitation plate. For these sterndrives we recommend the Sport 300. Both drill (2 hold or 4 hole) and drill-free stainless hardware included. Simple and quick drill-free mounting with a common wrench or socket and screw driver. Proven Disk-Grips™ hardware for the drill-free attachment will not screw into or damage the edge of your cavitation plate. Does not require the Sport Clip for a drill-free installation. Dimension 16"x17".
Trim Covers™ for SE Sport 400: Available in Red and Blue, these covers offer an alternative to the standard silver which accompanies the SE Sport 400.
ALT Part Numbers: SPT SE400BLK, 28-4252, 28-4253
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
SKU:779-SE400BLK
UPC:787199746444
SE SPORT 74646 HYDRO FOIL SE SPORT 400 GRAY
Price: $137.99
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: SE Sport 400 Hydrofoil for 40 HP & Up Drill-Free or Drill option
High Performance Hydrofoils streamlined for speed. The SE Sport will improve handling and provide better maneuverability with a smoother ride. Features Turbo Trac to enhance thrust and control. Crescent shaped surface quickly funnels water for more thrust-cutting planing time for the quickest hole shot. Cuts planing time dramatically and keeps the boat on plane at lower speeds while saving on fuel and providing better stability. Features high strength copolymer construction. Stainless steel hardware included. All hydrofoils and the Sport Clip are 100% molded, crafted, and made in USA.
Recommended for outboards and sterndrives 40 to unlimited horse power. Exclusion: Volvos with the exhaust through the cavitation plate. For these sterndrives we recommend the Sport 300. Both drill (2 hold or 4 hole) and drill-free stainless hardware included. Simple and quick drill-free mounting with a common wrench or socket and screw driver. Proven Disk-Grips™ hardware for the drill-free attachment will not screw into or damage the edge of your cavitation plate. Does not require the Sport Clip for a drill-free installation. Dimension 16"x17".
Trim Covers™ for SE Sport 400: Available in Red and Blue, these covers offer an alternative to the standard silver which accompanies the SE Sport 400.
High Performance Hydrofoils streamlined for speed. The SE Sport will improve handling and provide better maneuverability with a smoother ride. Features Turbo Trac to enhance thrust and control. Crescent shaped surface quickly funnels water for more thrust-cutting planing time for the quickest hole shot. Cuts planing time dramatically and keeps the boat on plane at lower speeds while saving on fuel and providing better stability. Features high strength copolymer construction. Stainless steel hardware included. All hydrofoils and the Sport Clip are 100% molded, crafted, and made in USA.
- Reduces or eliminates porpoising, cavitation, chine walking and deep-V wander
- Sleek shape complements today's new boat designs
- Silver trim covers all securing hardware
- Manufacturer's lifetime warranty
Recommended for outboards and sterndrives 40 to unlimited horse power. Exclusion: Volvos with the exhaust through the cavitation plate. For these sterndrives we recommend the Sport 300. Both drill (2 hold or 4 hole) and drill-free stainless hardware included. Simple and quick drill-free mounting with a common wrench or socket and screw driver. Proven Disk-Grips™ hardware for the drill-free attachment will not screw into or damage the edge of your cavitation plate. Does not require the Sport Clip for a drill-free installation. Dimension 16"x17".
Trim Covers™ for SE Sport 400: Available in Red and Blue, these covers offer an alternative to the standard silver which accompanies the SE Sport 400.
ALT Part Numbers: SPT SE400GY, 28-4254, 28-4255
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Se Sport
SKU:779-SE400GY
UPC:787199746468
SPORT MARINE TECHNOLOGIES 73435 ADAPTOR-NO DRILL FOR 8HP UP
Price: $62.85
Product Description: SE Sport 73435 Drill Free Sport Clip Fits most Outboards and Sterndrives 8 Horsepower And Up Drill Free Sport Clip, Application: Attaches to the cavitation plate to mount the SE Sport 200 or SE Sport 300 without drilling holes in the cavitation plate. Fits sterndrives and outboards (8HP to unlimited HP). Exceptions: Volvo with exhaust through the cavitation plate. Mercury Bravo II. Mercury Bravo III with only one anode on bottom of cavitation plate (rare). Honda 200 HP and higher. Yamaha 350HP.
ALT Part Numbers: SPT 73435, 28-5976, 28-5977
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
SKU:779-73435
UPC:787199734359
PANTHER 35SS715 SAFESKEG MERCURY 150HP 2012+
Price: $131.39
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Safe-Skeg, Mercury Ultimate Skeg Protection!
- Ideal if you're looking to protect your new skeg, repair your damaged one or just add some shine.
- 316 stainless steel construction
- Kit includes mounting hardware and instructions, allen wrench, loctite 262
- Material Thickness: 1.5 mm
- Drain hole to protect against corrosion and freeze-up
ALT Part Numbers: PAN 35SS715, 26-7966
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Panther
SKU:781-35SS715
UPC:836125003752
BENNETT TRIM TABS 6BT-50033-23-00 1/8 FEMALE ELBOW (BRASS)
Price: $12.49
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Bennett H1172 Female Elbow Bennett Female Brass Elbow
ALT Part Numbers: BEN H1172, 87-9036
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Bennett Trim Tabs
SKU:219-H1172
UPC:666285326305
