TURNING POINT PROPELLERS 3150 1741 PROP EXPRESS 4BL SS 14.5X17 LH
Price: $614.69
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Turning Point Propellers 31501741 Express Mach4 Propeller 14.5x17, 4-Blade S/S, LH Rotation
Why upgrade to a Tuning Point stainless steel propeller?
- Stainless steel propellers are much more durable compared to aluminum.
- Substantial better performance over competitive aluminum propellers. (Minimal performance difference, around 0.5-1mph speed gain over Turning Point Aluminum Propeller Designs.)
- Expect better performance over competitive OEM and Aftermarket S/S propellers.
These props re-wrote the rules, proving that you can run a 4-Blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers.
This Dual Geometry propeller is uniquely engineered with two blade geometries: two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and two blades utilize an offshore style design for high speed and maximum stern lift. These props re-wrote the rules, proving that you can run a 4-Blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers.
Lifts the entire boat higher out of the water:
By lifting the hull higher, boats tend to lose less speed when fully loaded versus a 3-Blade prop. With a lightly loaded boat, a 3-Blade is usually the faster prop for most applications. Alternatively when an application is loaded down with extra people and gear, a 3-Bladed prop can lose up to 3 MPH. This is because the hull is forced deeper into the water causing more wetted surface by the added weight. By lifting the hull higher the Turning Point 4 blade when fully loaded does not lose the top end speed compared to a 3-Blade propeller.
Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70's, 80's, 90's, and '00's, and will outrun most newer props, including five blade ski props.
Proprietary S/S, TP17™:
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
- Express® Mach4 S/S Dual Geometry 4 Blade Props for 90-300+hp Engines with 4.75" Gearcases.
- 4 Blades That Re-wrote the Rules.
- The props that put the "four" in Perfourmance!
- Unprecedented hole shot, lift, handling, ease of steering, and rough water stability.
- No top-end speed loss you experience with other manufacturers' 4 blade propellers keeps 3 blade top end speed.
- Lifts the entire boat higher out of the water.
- 4 blade Dual Geometry prop that has 3 blade top end speed with fast hole shot and unmatched handling.
- Stronger materials, more corrosion resistance, higher gloss and new casting technology.
- Includes Turning Point's cutting-edge designs.
- State-of-the-art casting technologies and race-proven finish and tuning practices to the Express line of props.
- Proprietary stainless steel, TP17™.
- Propellers fit COX®, Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, OXE®, Parsun®, Suzuki®, Tohatsu®,Volvo Penta®, & Yamaha® Outboards and Sterndrives.
- Uses 500 Installation/hub kits for applications under 200hp or 700 series Installation/hub kits for engines 200+hp.
- See application chart for engine application information and required Installation/hub kit part numbers.
Why upgrade to a Tuning Point stainless steel propeller?
- Stainless steel propellers are much more durable compared to aluminum.
- Substantial better performance over competitive aluminum propellers. (Minimal performance difference, around 0.5-1mph speed gain over Turning Point Aluminum Propeller Designs.)
- Expect better performance over competitive OEM and Aftermarket S/S propellers.
These props re-wrote the rules, proving that you can run a 4-Blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers.
This Dual Geometry propeller is uniquely engineered with two blade geometries: two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and two blades utilize an offshore style design for high speed and maximum stern lift. These props re-wrote the rules, proving that you can run a 4-Blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers.
Lifts the entire boat higher out of the water:
By lifting the hull higher, boats tend to lose less speed when fully loaded versus a 3-Blade prop. With a lightly loaded boat, a 3-Blade is usually the faster prop for most applications. Alternatively when an application is loaded down with extra people and gear, a 3-Bladed prop can lose up to 3 MPH. This is because the hull is forced deeper into the water causing more wetted surface by the added weight. By lifting the hull higher the Turning Point 4 blade when fully loaded does not lose the top end speed compared to a 3-Blade propeller.
Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70's, 80's, 90's, and '00's, and will outrun most newer props, including five blade ski props.
Proprietary S/S, TP17™:
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
ALT Part Numbers: TUR 31501741, 30-7191
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Turning Point Propellers
SKU:708-31501741
UPC:652480200823
TURNING POINT PROPELLERS 3150 1912 PROP EXPRESS 3BL SS 14.25X19RH
Price: $457.88
Product Description: Turning Point Propellers 31501912 Express Mach3 Propeller 14.25x19, 3-Blade S/S, RH Rotation (Standard)
Why upgrade to a Tuning Point stainless steel propeller?
- Stainless steel propellers are much more durable compared to aluminum.
- Substantial better performance over competitive aluminum propellers. (Minimal performance difference, around 0.5-1mph speed gain over Turning Point Aluminum Propeller Designs.)
- Expect better performance over competitive OEM and Aftermarket S/S propellers.
Utilizing almost 40 years of race boat and high performance prop design expertise, our Express Mach3 series of props captures all the best techniques and technologies available to get the most out of your boat. Aggressive pitch angles, radical designs, sharp cup profiles. These 3-Blade propellers excel at achieving maximum speed, while delivering Best-in-Class handling and acceleration. Hole Shot? Got it, and hang on! Cornering? We've got that, too! Top Speed? We say "No Faster Prop on the Water" for a reason!
Upgrading your current propeller from aluminum to stainless steel, or from an old generation design to the latest technology, Express Mach3 Propeller is the best investment in boat improvement you can make. Today's New Designs will run circles around the competition, and can make dramatic improvements in boat performance. The gain in fuel economy can often pay for the cost of a new propeller in one or two seasons, making it a sound investment in your time on the water.
Proprietary S/S, TP17™:
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
- Express® Mach3 S/S 3 Blade Props for 90-300+hp Engines with 4.75" Gearcases.
- Stronger materials, more corrosion resistance, higher gloss and new casting technology.
- Includes Turning Point's cutting-edge designs.
- State-of-the-art casting technologies and race-proven finish and tuning practices to the Express line of props.
- Proprietary stainless steel, TP17™.
- Performance tuned pitch, rake angles, and exhaust vents improve all around performance.
- Propellers fit COX®, Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, OXE®, Parsun®, Suzuki®, Tohatsu®,Volvo Penta®, & Yamaha® Outboards and Sterndrives.
- Uses 500 Installation/hub kits for applications under 200hp or 700 series Installation/hub kits for engines 200+hp.
- See application chart for engine application information and required Installation/hub kit part numbers.
Why upgrade to a Tuning Point stainless steel propeller?
- Stainless steel propellers are much more durable compared to aluminum.
- Substantial better performance over competitive aluminum propellers. (Minimal performance difference, around 0.5-1mph speed gain over Turning Point Aluminum Propeller Designs.)
- Expect better performance over competitive OEM and Aftermarket S/S propellers.
Utilizing almost 40 years of race boat and high performance prop design expertise, our Express Mach3 series of props captures all the best techniques and technologies available to get the most out of your boat. Aggressive pitch angles, radical designs, sharp cup profiles. These 3-Blade propellers excel at achieving maximum speed, while delivering Best-in-Class handling and acceleration. Hole Shot? Got it, and hang on! Cornering? We've got that, too! Top Speed? We say "No Faster Prop on the Water" for a reason!
Upgrading your current propeller from aluminum to stainless steel, or from an old generation design to the latest technology, Express Mach3 Propeller is the best investment in boat improvement you can make. Today's New Designs will run circles around the competition, and can make dramatic improvements in boat performance. The gain in fuel economy can often pay for the cost of a new propeller in one or two seasons, making it a sound investment in your time on the water.
Proprietary S/S, TP17™:
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
ALT Part Numbers: TUR 31501912, 30-7192
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Turning Point Propellers
SKU:708-31501912
UPC:652480200830
TURNING POINT PROPELLERS 3150 1922 PROP EXPRESS 3BL SS 14.25X19LH
Price: $567.79
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Turning Point Propellers 31501922 Express Mach3 Propeller 14.25x19, 3-Blade S/S, LH Rotation
Why upgrade to a Tuning Point stainless steel propeller?
- Stainless steel propellers are much more durable compared to aluminum.
- Substantial better performance over competitive aluminum propellers. (Minimal performance difference, around 0.5-1mph speed gain over Turning Point Aluminum Propeller Designs.)
- Expect better performance over competitive OEM and Aftermarket S/S propellers.
Utilizing almost 40 years of race boat and high performance prop design expertise, our Express Mach3 series of props captures all the best techniques and technologies available to get the most out of your boat. Aggressive pitch angles, radical designs, sharp cup profiles. These 3-Blade propellers excel at achieving maximum speed, while delivering Best-in-Class handling and acceleration. Hole Shot? Got it, and hang on! Cornering? We've got that, too! Top Speed? We say "No Faster Prop on the Water" for a reason!
Upgrading your current propeller from aluminum to stainless steel, or from an old generation design to the latest technology, Express Mach3 Propeller is the best investment in boat improvement you can make. Today's New Designs will run circles around the competition, and can make dramatic improvements in boat performance. The gain in fuel economy can often pay for the cost of a new propeller in one or two seasons, making it a sound investment in your time on the water.
Proprietary S/S, TP17™:
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
- Express® Mach3 S/S 3 Blade Props for 90-300+hp Engines with 4.75" Gearcases.
- Stronger materials, more corrosion resistance, higher gloss and new casting technology.
- Includes Turning Point's cutting-edge designs.
- State-of-the-art casting technologies and race-proven finish and tuning practices to the Express line of props.
- Proprietary stainless steel, TP17™.
- Performance tuned pitch, rake angles, and exhaust vents improve all around performance.
- Propellers fit COX®, Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, OXE®, Parsun®, Suzuki®, Tohatsu®,Volvo Penta®, & Yamaha® Outboards and Sterndrives.
- Uses 500 Installation/hub kits for applications under 200hp or 700 series Installation/hub kits for engines 200+hp.
- See application chart for engine application information and required Installation/hub kit part numbers.
Why upgrade to a Tuning Point stainless steel propeller?
- Stainless steel propellers are much more durable compared to aluminum.
- Substantial better performance over competitive aluminum propellers. (Minimal performance difference, around 0.5-1mph speed gain over Turning Point Aluminum Propeller Designs.)
- Expect better performance over competitive OEM and Aftermarket S/S propellers.
Utilizing almost 40 years of race boat and high performance prop design expertise, our Express Mach3 series of props captures all the best techniques and technologies available to get the most out of your boat. Aggressive pitch angles, radical designs, sharp cup profiles. These 3-Blade propellers excel at achieving maximum speed, while delivering Best-in-Class handling and acceleration. Hole Shot? Got it, and hang on! Cornering? We've got that, too! Top Speed? We say "No Faster Prop on the Water" for a reason!
Upgrading your current propeller from aluminum to stainless steel, or from an old generation design to the latest technology, Express Mach3 Propeller is the best investment in boat improvement you can make. Today's New Designs will run circles around the competition, and can make dramatic improvements in boat performance. The gain in fuel economy can often pay for the cost of a new propeller in one or two seasons, making it a sound investment in your time on the water.
Proprietary S/S, TP17™:
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
ALT Part Numbers: TUR 31501922, 30-7193
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Turning Point Propellers
SKU:708-31501922
UPC:652480200847
TURNING POINT PROPELLERS 3150 1931 PROP EXPRESS 4BL SS 14X19 RH
Price: $497.11
Product Description: Turning Point Propellers 31501931 Express Mach4 Propeller 14x19, 4-Blade S/S, RH Rotation (Standard)
Why upgrade to a Tuning Point stainless steel propeller?
- Stainless steel propellers are much more durable compared to aluminum.
- Substantial better performance over competitive aluminum propellers. (Minimal performance difference, around 0.5-1mph speed gain over Turning Point Aluminum Propeller Designs.)
- Expect better performance over competitive OEM and Aftermarket S/S propellers.
These props re-wrote the rules, proving that you can run a 4-Blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers.
This Dual Geometry propeller is uniquely engineered with two blade geometries: two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and two blades utilize an offshore style design for high speed and maximum stern lift. These props re-wrote the rules, proving that you can run a 4-Blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers.
Lifts the entire boat higher out of the water:
By lifting the hull higher, boats tend to lose less speed when fully loaded versus a 3-Blade prop. With a lightly loaded boat, a 3-Blade is usually the faster prop for most applications. Alternatively when an application is loaded down with extra people and gear, a 3-Bladed prop can lose up to 3 MPH. This is because the hull is forced deeper into the water causing more wetted surface by the added weight. By lifting the hull higher the Turning Point 4 blade when fully loaded does not lose the top end speed compared to a 3-Blade propeller.
Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70's, 80's, 90's, and '00's, and will outrun most newer props, including five blade ski props.
Proprietary S/S, TP17™:
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
- Express® Mach4 S/S Dual Geometry 4 Blade Props for 90-300+hp Engines with 4.75" Gearcases.
- 4 Blades That Re-wrote the Rules.
- The props that put the "four" in Perfourmance!
- Unprecedented hole shot, lift, handling, ease of steering, and rough water stability.
- No top-end speed loss you experience with other manufacturers' 4 blade propellers keeps 3 blade top end speed.
- Lifts the entire boat higher out of the water.
- 4 blade Dual Geometry prop that has 3 blade top end speed with fast hole shot and unmatched handling.
- Stronger materials, more corrosion resistance, higher gloss and new casting technology.
- Includes Turning Point's cutting-edge designs.
- State-of-the-art casting technologies and race-proven finish and tuning practices to the Express line of props.
- Proprietary stainless steel, TP17™.
- Propellers fit COX®, Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, OXE®, Parsun®, Suzuki®, Tohatsu®,Volvo Penta®, & Yamaha® Outboards and Sterndrives.
- Uses 500 Installation/hub kits for applications under 200hp or 700 series Installation/hub kits for engines 200+hp.
- See application chart for engine application information and required Installation/hub kit part numbers.
Why upgrade to a Tuning Point stainless steel propeller?
- Stainless steel propellers are much more durable compared to aluminum.
- Substantial better performance over competitive aluminum propellers. (Minimal performance difference, around 0.5-1mph speed gain over Turning Point Aluminum Propeller Designs.)
- Expect better performance over competitive OEM and Aftermarket S/S propellers.
These props re-wrote the rules, proving that you can run a 4-Blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers.
This Dual Geometry propeller is uniquely engineered with two blade geometries: two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and two blades utilize an offshore style design for high speed and maximum stern lift. These props re-wrote the rules, proving that you can run a 4-Blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers.
Lifts the entire boat higher out of the water:
By lifting the hull higher, boats tend to lose less speed when fully loaded versus a 3-Blade prop. With a lightly loaded boat, a 3-Blade is usually the faster prop for most applications. Alternatively when an application is loaded down with extra people and gear, a 3-Bladed prop can lose up to 3 MPH. This is because the hull is forced deeper into the water causing more wetted surface by the added weight. By lifting the hull higher the Turning Point 4 blade when fully loaded does not lose the top end speed compared to a 3-Blade propeller.
Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70's, 80's, 90's, and '00's, and will outrun most newer props, including five blade ski props.
Proprietary S/S, TP17™:
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
ALT Part Numbers: TUR 31501931, 30-7194
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Turning Point Propellers
SKU:708-31501931
UPC:652480200854
TURNING POINT PROPELLERS 3150 1941 PROP EXPRESS 4BL SS 14X19 LH
Price: $614.69
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Turning Point Propellers 31501941 Express Mach4 Propeller 14x19, 4-Blade S/S, LH Rotation
Why upgrade to a Tuning Point stainless steel propeller?
- Stainless steel propellers are much more durable compared to aluminum.
- Substantial better performance over competitive aluminum propellers. (Minimal performance difference, around 0.5-1mph speed gain over Turning Point Aluminum Propeller Designs.)
- Expect better performance over competitive OEM and Aftermarket S/S propellers.
These props re-wrote the rules, proving that you can run a 4-Blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers.
This Dual Geometry propeller is uniquely engineered with two blade geometries: two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and two blades utilize an offshore style design for high speed and maximum stern lift. These props re-wrote the rules, proving that you can run a 4-Blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers.
Lifts the entire boat higher out of the water:
By lifting the hull higher, boats tend to lose less speed when fully loaded versus a 3-Blade prop. With a lightly loaded boat, a 3-Blade is usually the faster prop for most applications. Alternatively when an application is loaded down with extra people and gear, a 3-Bladed prop can lose up to 3 MPH. This is because the hull is forced deeper into the water causing more wetted surface by the added weight. By lifting the hull higher the Turning Point 4 blade when fully loaded does not lose the top end speed compared to a 3-Blade propeller.
Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70's, 80's, 90's, and '00's, and will outrun most newer props, including five blade ski props.
Proprietary S/S, TP17™:
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
- Express® Mach4 S/S Dual Geometry 4 Blade Props for 90-300+hp Engines with 4.75" Gearcases.
- 4 Blades That Re-wrote the Rules.
- The props that put the "four" in Perfourmance!
- Unprecedented hole shot, lift, handling, ease of steering, and rough water stability.
- No top-end speed loss you experience with other manufacturers' 4 blade propellers keeps 3 blade top end speed.
- Lifts the entire boat higher out of the water.
- 4 blade Dual Geometry prop that has 3 blade top end speed with fast hole shot and unmatched handling.
- Stronger materials, more corrosion resistance, higher gloss and new casting technology.
- Includes Turning Point's cutting-edge designs.
- State-of-the-art casting technologies and race-proven finish and tuning practices to the Express line of props.
- Proprietary stainless steel, TP17™.
- Propellers fit COX®, Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, OXE®, Parsun®, Suzuki®, Tohatsu®,Volvo Penta®, & Yamaha® Outboards and Sterndrives.
- Uses 500 Installation/hub kits for applications under 200hp or 700 series Installation/hub kits for engines 200+hp.
- See application chart for engine application information and required Installation/hub kit part numbers.
Why upgrade to a Tuning Point stainless steel propeller?
- Stainless steel propellers are much more durable compared to aluminum.
- Substantial better performance over competitive aluminum propellers. (Minimal performance difference, around 0.5-1mph speed gain over Turning Point Aluminum Propeller Designs.)
- Expect better performance over competitive OEM and Aftermarket S/S propellers.
These props re-wrote the rules, proving that you can run a 4-Blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers.
This Dual Geometry propeller is uniquely engineered with two blade geometries: two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and two blades utilize an offshore style design for high speed and maximum stern lift. These props re-wrote the rules, proving that you can run a 4-Blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers.
Lifts the entire boat higher out of the water:
By lifting the hull higher, boats tend to lose less speed when fully loaded versus a 3-Blade prop. With a lightly loaded boat, a 3-Blade is usually the faster prop for most applications. Alternatively when an application is loaded down with extra people and gear, a 3-Bladed prop can lose up to 3 MPH. This is because the hull is forced deeper into the water causing more wetted surface by the added weight. By lifting the hull higher the Turning Point 4 blade when fully loaded does not lose the top end speed compared to a 3-Blade propeller.
Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70's, 80's, 90's, and '00's, and will outrun most newer props, including five blade ski props.
Proprietary S/S, TP17™:
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
ALT Part Numbers: TUR 31501941, 30-7195
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Turning Point Propellers
SKU:708-31501941
UPC:652480200861
TURNING POINT PROPELLERS 3150 2112 PROP EXPRESS 3BL SS 14.25X21RH
Price: $457.88
Not In StockMay be available soon with price change.
Item may be special order or out of stock. Please call 321-952-1303 or Contact Us for price and availability.
Product Description: Turning Point Propellers 31502112 Express Mach3 Propeller 14.25x21, 3-Blade S/S, RH Rotation (Standard)
Why upgrade to a Tuning Point stainless steel propeller?
- Stainless steel propellers are much more durable compared to aluminum.
- Substantial better performance over competitive aluminum propellers. (Minimal performance difference, around 0.5-1mph speed gain over Turning Point Aluminum Propeller Designs.)
- Expect better performance over competitive OEM and Aftermarket S/S propellers.
Utilizing almost 40 years of race boat and high performance prop design expertise, our Express Mach3 series of props captures all the best techniques and technologies available to get the most out of your boat. Aggressive pitch angles, radical designs, sharp cup profiles. These 3-Blade propellers excel at achieving maximum speed, while delivering Best-in-Class handling and acceleration. Hole Shot? Got it, and hang on! Cornering? We've got that, too! Top Speed? We say "No Faster Prop on the Water" for a reason!
Upgrading your current propeller from aluminum to stainless steel, or from an old generation design to the latest technology, Express Mach3 Propeller is the best investment in boat improvement you can make. Today's New Designs will run circles around the competition, and can make dramatic improvements in boat performance. The gain in fuel economy can often pay for the cost of a new propeller in one or two seasons, making it a sound investment in your time on the water.
Proprietary S/S, TP17™:
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
- Express® Mach3 S/S 3 Blade Props for 90-300+hp Engines with 4.75" Gearcases.
- Stronger materials, more corrosion resistance, higher gloss and new casting technology.
- Includes Turning Point's cutting-edge designs.
- State-of-the-art casting technologies and race-proven finish and tuning practices to the Express line of props.
- Proprietary stainless steel, TP17™.
- Performance tuned pitch, rake angles, and exhaust vents improve all around performance.
- Propellers fit COX®, Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, OXE®, Parsun®, Suzuki®, Tohatsu®,Volvo Penta®, & Yamaha® Outboards and Sterndrives.
- Uses 500 Installation/hub kits for applications under 200hp or 700 series Installation/hub kits for engines 200+hp.
- See application chart for engine application information and required Installation/hub kit part numbers.
Why upgrade to a Tuning Point stainless steel propeller?
- Stainless steel propellers are much more durable compared to aluminum.
- Substantial better performance over competitive aluminum propellers. (Minimal performance difference, around 0.5-1mph speed gain over Turning Point Aluminum Propeller Designs.)
- Expect better performance over competitive OEM and Aftermarket S/S propellers.
Utilizing almost 40 years of race boat and high performance prop design expertise, our Express Mach3 series of props captures all the best techniques and technologies available to get the most out of your boat. Aggressive pitch angles, radical designs, sharp cup profiles. These 3-Blade propellers excel at achieving maximum speed, while delivering Best-in-Class handling and acceleration. Hole Shot? Got it, and hang on! Cornering? We've got that, too! Top Speed? We say "No Faster Prop on the Water" for a reason!
Upgrading your current propeller from aluminum to stainless steel, or from an old generation design to the latest technology, Express Mach3 Propeller is the best investment in boat improvement you can make. Today's New Designs will run circles around the competition, and can make dramatic improvements in boat performance. The gain in fuel economy can often pay for the cost of a new propeller in one or two seasons, making it a sound investment in your time on the water.
Proprietary S/S, TP17™:
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
ALT Part Numbers: TUR 31502112, 30-7196
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Turning Point Propellers
SKU:708-31502112
UPC:652480200878
TURNING POINT PROPELLERS 3150 2122 PROP EXPRESS 3BL SS 14.25X21LH
Price: $566.69
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Turning Point Propellers 31502122 Express Mach3 Propeller 14.25x21, 3-Blade S/S, LH Rotation
Why upgrade to a Tuning Point stainless steel propeller?
- Stainless steel propellers are much more durable compared to aluminum.
- Substantial better performance over competitive aluminum propellers. (Minimal performance difference, around 0.5-1mph speed gain over Turning Point Aluminum Propeller Designs.)
- Expect better performance over competitive OEM and Aftermarket S/S propellers.
Utilizing almost 40 years of race boat and high performance prop design expertise, our Express Mach3 series of props captures all the best techniques and technologies available to get the most out of your boat. Aggressive pitch angles, radical designs, sharp cup profiles. These 3-Blade propellers excel at achieving maximum speed, while delivering Best-in-Class handling and acceleration. Hole Shot? Got it, and hang on! Cornering? We've got that, too! Top Speed? We say "No Faster Prop on the Water" for a reason!
Upgrading your current propeller from aluminum to stainless steel, or from an old generation design to the latest technology, Express Mach3 Propeller is the best investment in boat improvement you can make. Today's New Designs will run circles around the competition, and can make dramatic improvements in boat performance. The gain in fuel economy can often pay for the cost of a new propeller in one or two seasons, making it a sound investment in your time on the water.
Proprietary S/S, TP17™:
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
- Express® Mach3 S/S 3 Blade Props for 90-300+hp Engines with 4.75" Gearcases.
- Stronger materials, more corrosion resistance, higher gloss and new casting technology.
- Includes Turning Point's cutting-edge designs.
- State-of-the-art casting technologies and race-proven finish and tuning practices to the Express line of props.
- Proprietary stainless steel, TP17™.
- Performance tuned pitch, rake angles, and exhaust vents improve all around performance.
- Propellers fit COX®, Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, OXE®, Parsun®, Suzuki®, Tohatsu®,Volvo Penta®, & Yamaha® Outboards and Sterndrives.
- Uses 500 Installation/hub kits for applications under 200hp or 700 series Installation/hub kits for engines 200+hp.
- See application chart for engine application information and required Installation/hub kit part numbers.
Why upgrade to a Tuning Point stainless steel propeller?
- Stainless steel propellers are much more durable compared to aluminum.
- Substantial better performance over competitive aluminum propellers. (Minimal performance difference, around 0.5-1mph speed gain over Turning Point Aluminum Propeller Designs.)
- Expect better performance over competitive OEM and Aftermarket S/S propellers.
Utilizing almost 40 years of race boat and high performance prop design expertise, our Express Mach3 series of props captures all the best techniques and technologies available to get the most out of your boat. Aggressive pitch angles, radical designs, sharp cup profiles. These 3-Blade propellers excel at achieving maximum speed, while delivering Best-in-Class handling and acceleration. Hole Shot? Got it, and hang on! Cornering? We've got that, too! Top Speed? We say "No Faster Prop on the Water" for a reason!
Upgrading your current propeller from aluminum to stainless steel, or from an old generation design to the latest technology, Express Mach3 Propeller is the best investment in boat improvement you can make. Today's New Designs will run circles around the competition, and can make dramatic improvements in boat performance. The gain in fuel economy can often pay for the cost of a new propeller in one or two seasons, making it a sound investment in your time on the water.
Proprietary S/S, TP17™:
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
ALT Part Numbers: TUR 31502122, 30-7197
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Turning Point Propellers
SKU:708-31502122
UPC:652480200885
TURNING POINT PROPELLERS 3150 2131 PROP EXPRESS 4BL SS 14X21 RH
Price: $497.11
Product Description: Turning Point Propellers 31502131 Express Mach4 Propeller 14x21, 4-Blade S/S, RH Rotation (Standard)
Why upgrade to a Tuning Point stainless steel propeller?
- Stainless steel propellers are much more durable compared to aluminum.
- Substantial better performance over competitive aluminum propellers. (Minimal performance difference, around 0.5-1mph speed gain over Turning Point Aluminum Propeller Designs.)
- Expect better performance over competitive OEM and Aftermarket S/S propellers.
These props re-wrote the rules, proving that you can run a 4-Blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers.
This Dual Geometry propeller is uniquely engineered with two blade geometries: two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and two blades utilize an offshore style design for high speed and maximum stern lift. These props re-wrote the rules, proving that you can run a 4-Blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers.
Lifts the entire boat higher out of the water:
By lifting the hull higher, boats tend to lose less speed when fully loaded versus a 3-Blade prop. With a lightly loaded boat, a 3-Blade is usually the faster prop for most applications. Alternatively when an application is loaded down with extra people and gear, a 3-Bladed prop can lose up to 3 MPH. This is because the hull is forced deeper into the water causing more wetted surface by the added weight. By lifting the hull higher the Turning Point 4 blade when fully loaded does not lose the top end speed compared to a 3-Blade propeller.
Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70's, 80's, 90's, and '00's, and will outrun most newer props, including five blade ski props.
Proprietary S/S, TP17™:
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
- Express® Mach4 S/S Dual Geometry 4 Blade Props for 90-300+hp Engines with 4.75" Gearcases.
- 4 Blades That Re-wrote the Rules.
- The props that put the "four" in Perfourmance!
- Unprecedented hole shot, lift, handling, ease of steering, and rough water stability.
- No top-end speed loss you experience with other manufacturers' 4 blade propellers keeps 3 blade top end speed.
- Lifts the entire boat higher out of the water.
- 4 blade Dual Geometry prop that has 3 blade top end speed with fast hole shot and unmatched handling.
- Stronger materials, more corrosion resistance, higher gloss and new casting technology.
- Includes Turning Point's cutting-edge designs.
- State-of-the-art casting technologies and race-proven finish and tuning practices to the Express line of props.
- Proprietary stainless steel, TP17™.
- Propellers fit COX®, Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, OXE®, Parsun®, Suzuki®, Tohatsu®,Volvo Penta®, & Yamaha® Outboards and Sterndrives.
- Uses 500 Installation/hub kits for applications under 200hp or 700 series Installation/hub kits for engines 200+hp.
- See application chart for engine application information and required Installation/hub kit part numbers.
Why upgrade to a Tuning Point stainless steel propeller?
- Stainless steel propellers are much more durable compared to aluminum.
- Substantial better performance over competitive aluminum propellers. (Minimal performance difference, around 0.5-1mph speed gain over Turning Point Aluminum Propeller Designs.)
- Expect better performance over competitive OEM and Aftermarket S/S propellers.
These props re-wrote the rules, proving that you can run a 4-Blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers.
This Dual Geometry propeller is uniquely engineered with two blade geometries: two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and two blades utilize an offshore style design for high speed and maximum stern lift. These props re-wrote the rules, proving that you can run a 4-Blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers.
Lifts the entire boat higher out of the water:
By lifting the hull higher, boats tend to lose less speed when fully loaded versus a 3-Blade prop. With a lightly loaded boat, a 3-Blade is usually the faster prop for most applications. Alternatively when an application is loaded down with extra people and gear, a 3-Bladed prop can lose up to 3 MPH. This is because the hull is forced deeper into the water causing more wetted surface by the added weight. By lifting the hull higher the Turning Point 4 blade when fully loaded does not lose the top end speed compared to a 3-Blade propeller.
Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70's, 80's, 90's, and '00's, and will outrun most newer props, including five blade ski props.
Proprietary S/S, TP17™:
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
ALT Part Numbers: TUR 31502131, 30-7198
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Turning Point Propellers
SKU:708-31502131
UPC:652480200892
TURNING POINT PROPELLERS 3150 2141 PROP EXPRESS 4BL SS 14X21 LH
Price: $614.69
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Turning Point Propellers 31502141 Express Mach4 Propeller 14x21, 4-Blade S/S, LH Rotation
Why upgrade to a Tuning Point stainless steel propeller?
- Stainless steel propellers are much more durable compared to aluminum.
- Substantial better performance over competitive aluminum propellers. (Minimal performance difference, around 0.5-1mph speed gain over Turning Point Aluminum Propeller Designs.)
- Expect better performance over competitive OEM and Aftermarket S/S propellers.
These props re-wrote the rules, proving that you can run a 4-Blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers.
This Dual Geometry propeller is uniquely engineered with two blade geometries: two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and two blades utilize an offshore style design for high speed and maximum stern lift. These props re-wrote the rules, proving that you can run a 4-Blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers.
Lifts the entire boat higher out of the water:
By lifting the hull higher, boats tend to lose less speed when fully loaded versus a 3-Blade prop. With a lightly loaded boat, a 3-Blade is usually the faster prop for most applications. Alternatively when an application is loaded down with extra people and gear, a 3-Bladed prop can lose up to 3 MPH. This is because the hull is forced deeper into the water causing more wetted surface by the added weight. By lifting the hull higher the Turning Point 4 blade when fully loaded does not lose the top end speed compared to a 3-Blade propeller.
Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70's, 80's, 90's, and '00's, and will outrun most newer props, including five blade ski props.
Proprietary S/S, TP17™:
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
- Express® Mach4 S/S Dual Geometry 4 Blade Props for 90-300+hp Engines with 4.75" Gearcases.
- 4 Blades That Re-wrote the Rules.
- The props that put the "four" in Perfourmance!
- Unprecedented hole shot, lift, handling, ease of steering, and rough water stability.
- No top-end speed loss you experience with other manufacturers' 4 blade propellers keeps 3 blade top end speed.
- Lifts the entire boat higher out of the water.
- 4 blade Dual Geometry prop that has 3 blade top end speed with fast hole shot and unmatched handling.
- Stronger materials, more corrosion resistance, higher gloss and new casting technology.
- Includes Turning Point's cutting-edge designs.
- State-of-the-art casting technologies and race-proven finish and tuning practices to the Express line of props.
- Proprietary stainless steel, TP17™.
- Propellers fit COX®, Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, OXE®, Parsun®, Suzuki®, Tohatsu®,Volvo Penta®, & Yamaha® Outboards and Sterndrives.
- Uses 500 Installation/hub kits for applications under 200hp or 700 series Installation/hub kits for engines 200+hp.
- See application chart for engine application information and required Installation/hub kit part numbers.
Why upgrade to a Tuning Point stainless steel propeller?
- Stainless steel propellers are much more durable compared to aluminum.
- Substantial better performance over competitive aluminum propellers. (Minimal performance difference, around 0.5-1mph speed gain over Turning Point Aluminum Propeller Designs.)
- Expect better performance over competitive OEM and Aftermarket S/S propellers.
These props re-wrote the rules, proving that you can run a 4-Blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers.
This Dual Geometry propeller is uniquely engineered with two blade geometries: two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and two blades utilize an offshore style design for high speed and maximum stern lift. These props re-wrote the rules, proving that you can run a 4-Blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers.
Lifts the entire boat higher out of the water:
By lifting the hull higher, boats tend to lose less speed when fully loaded versus a 3-Blade prop. With a lightly loaded boat, a 3-Blade is usually the faster prop for most applications. Alternatively when an application is loaded down with extra people and gear, a 3-Bladed prop can lose up to 3 MPH. This is because the hull is forced deeper into the water causing more wetted surface by the added weight. By lifting the hull higher the Turning Point 4 blade when fully loaded does not lose the top end speed compared to a 3-Blade propeller.
Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70's, 80's, 90's, and '00's, and will outrun most newer props, including five blade ski props.
Proprietary S/S, TP17™:
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
ALT Part Numbers: TUR 31502141, 30-7199
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Turning Point Propellers
SKU:708-31502141
UPC:652480200908
BENNETT TRIM TABS 6BT-50068-93-00 12 X 12 SPARE PLANE ASSEMBLY
Price: $225.29
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Bennett TPA1212 Trim Plane Assembly, 12" x 12" Riveted Angle Style Bennett Marines durable and dependable trim planes are made of high quality 12 gauge 304 stainless steel. Each trim plane assembly includes a trim plane, backing plate and hinge for one side of the boat.
ALT Part Numbers: BEN TPA1212, 07-0996
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Bennett Trim Tabs
SKU:219-TPA1212
UPC:666285301906
