LENCO 15084-001 REMOTE GLAND SEAL KIT
Price: $29.83
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Lenco Remote Gland Seal Kit Used as an alternative method of routing the actuator wires through the transom above or below the waterline.
Contents:
Contents:
- (2) mounts,
- (2) gland seals
- (6) mounting screws
ALT Part Numbers: LEN 15084001, 38-8598
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Lenco
SKU:622-15084001
UPC:874847007337
LENCO 11941-002 20' LED FLYBRIDGE KIT
Price: $352.95
Product Description: Lenco Flybridge Kit For 2pc LED Integrated Kits Second station LED Key Pad connecting to the (2-Piece)
Tactile Switch Kit (part# 15270-001 and/or 15271-001) by plugging into the Y Connector Harness.
Tactile Switch Kit (part# 15270-001 and/or 15271-001) by plugging into the Y Connector Harness.
ALT Part Numbers: LEN 11941002, 39-4973
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Lenco
SKU:622-11941002
UPC:874847007528
LENCO 10250-401D UNIV. ACT HDW REPLACE. KIT
Price: $16.94
Product Description: Lenco Standard Actuator Replacement Hardware Kit Used in conjunction with Lenco 101 & 102 Standard Actuators. Includes all stainless steel hardware and Delrin pins.
ALT Part Numbers: LEN 10250401D, 39-4970
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Lenco
SKU:622-10250401D
UPC:874847006675
TURNING POINT PROPELLERS 11700100 HUB MASTERGUARD S/D 701 200+HP
Price: $93.99
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Turning Point Propellers MasterGuard Super Duty Installation Kit 701 (11700100)
Turning Point is the only company to offer MasterGuard® Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 33% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed (hub warranty on consumer use only - visit https://tpprops.com/warranty for details) . These hubs offer enhancedlower unit protection.
Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems.
Eliminate Hub System Vibration and Chatter: Innovative one piece design reduces the number of parts and eliminates failures commonly seen in multi-part hub systems.
Eliminate Hub Cracking and Failure: The glass reinforced high-tech polymer construction increases flexibility, eliminating potential material stress fractures.
Corrosion Resistant Materials: Premium corrosion resistant durable marine bronze splines.
Reduce Gear Shock and Engine/Drive Damage: MasterGuard hubs offer Shock absorbing high-tech polymer cushion with lower unit protection.
Easy to Install: Clear and easy step-by-step directions coupled with minimal parts makes installation easy.
- MasterGuard Super Duty 700 Series Installation Kit for Engines 4.75" Gearcases
- Lifetime warranty for engines 200+hp with stainless steel props.
- New Hub for High Horsepower Outboards and Sterndrives High Horsepower Outboards and Sterndrives put extreme stress on a boat's driveline components. The increased torque output of supercharged, V-6 and V-8, and diesel outboards are testing the limits of modern metallurgy and thermoplastic engineering.
- For any installation of 200+hp Engine w/ a S/S Prop, the use of a 700 Series Super Duty Kit is now required to qualify for our Lifetime Warranty (Otherwise use the standard 500 Series).
- MasterGuard Installation/Hub Kits carry the only Lifetime Warranty in the WORLD!
- Hubs have no warranty restrictions, except for extreme commercial use.
- Saves a boater up to 33% on replacement propeller purchases (need to purchase prop housing only).
- One piece design: durable marine Bronze with Over Molded Glass Filled Nylon for Long Life.
- Re-useable after a Prop Strike.
- Warranted even if the prop is Destroyed! (consumer normal use only, not applicable on commercial applications)
- Enhanced lower unit protection.
- Warranted even if used in competitive propeller housings (Mercury, Michigan Wheel, Solas).
- Each kit contains a hub, thrust washer, and other hardware for installing Turning Point Express Mach3, Mach3 OS, and Mach4 propeller housings on most engines with 4.75" gearcase.
- Also used as a hub upgrade to fit Solas Rubex, Michigan Wheel XHS, and Mercury FloTorq propeller housings.
- Installation Kits for Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, & Yamaha® Outboards and Sterndrives.
- See application chart for engine application information.
Turning Point is the only company to offer MasterGuard® Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 33% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed (hub warranty on consumer use only - visit https://tpprops.com/warranty for details) . These hubs offer enhancedlower unit protection.
Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems.
Eliminate Hub System Vibration and Chatter: Innovative one piece design reduces the number of parts and eliminates failures commonly seen in multi-part hub systems.
Eliminate Hub Cracking and Failure: The glass reinforced high-tech polymer construction increases flexibility, eliminating potential material stress fractures.
Corrosion Resistant Materials: Premium corrosion resistant durable marine bronze splines.
Reduce Gear Shock and Engine/Drive Damage: MasterGuard hubs offer Shock absorbing high-tech polymer cushion with lower unit protection.
Easy to Install: Clear and easy step-by-step directions coupled with minimal parts makes installation easy.
ALT Part Numbers: TUR 11700100, 39-6124
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Turning Point Propellers
SKU:708-11700100
UPC:652480206771
TURNING POINT PROPELLERS 11700500 HUB MASTERGUARD S/D 705 200+HP
Price: $102.29
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Turning Point Propellers MasterGuard Super Duty Installation Kit 705 (11700500)
Turning Point is the only company to offer MasterGuard® Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 33% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed (hub warranty on consumer use only - visit https://tpprops.com/warranty for details) . These hubs offer enhancedlower unit protection.
Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems.
Eliminate Hub System Vibration and Chatter: Innovative one piece design reduces the number of parts and eliminates failures commonly seen in multi-part hub systems.
Eliminate Hub Cracking and Failure: The glass reinforced high-tech polymer construction increases flexibility, eliminating potential material stress fractures.
Corrosion Resistant Materials: Premium corrosion resistant durable marine bronze splines.
Reduce Gear Shock and Engine/Drive Damage: MasterGuard hubs offer Shock absorbing high-tech polymer cushion with lower unit protection.
Easy to Install: Clear and easy step-by-step directions coupled with minimal parts makes installation easy.
- MasterGuard Super Duty 700 Series Installation Kit for Engines 4.75" Gearcases
- Lifetime warranty for engines 200+hp with stainless steel props.
- New Hub for High Horsepower Outboards and Sterndrives High Horsepower Outboards and Sterndrives put extreme stress on a boat's driveline components. The increased torque output of supercharged, V-6 and V-8, and diesel outboards are testing the limits of modern metallurgy and thermoplastic engineering.
- For any installation of 200+hp Engine w/ a S/S Prop, the use of a 700 Series Super Duty Kit is now required to qualify for our Lifetime Warranty (Otherwise use the standard 500 Series).
- MasterGuard Installation/Hub Kits carry the only Lifetime Warranty in the WORLD!
- Hubs have no warranty restrictions, except for extreme commercial use.
- Saves a boater up to 33% on replacement propeller purchases (need to purchase prop housing only).
- One piece design: durable marine Bronze with Over Molded Glass Filled Nylon for Long Life.
- Re-useable after a Prop Strike.
- Warranted even if the prop is Destroyed! (consumer normal use only, not applicable on commercial applications)
- Enhanced lower unit protection.
- Warranted even if used in competitive propeller housings (Mercury, Michigan Wheel, Solas).
- Each kit contains a hub, thrust washer, and other hardware for installing Turning Point Express Mach3, Mach3 OS, and Mach4 propeller housings on most engines with 4.75" gearcase.
- Also used as a hub upgrade to fit Solas Rubex, Michigan Wheel XHS, and Mercury FloTorq propeller housings.
- Installation Kits for Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, & Yamaha® Outboards and Sterndrives.
- See application chart for engine application information.
Turning Point is the only company to offer MasterGuard® Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 33% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed (hub warranty on consumer use only - visit https://tpprops.com/warranty for details) . These hubs offer enhancedlower unit protection.
Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems.
Eliminate Hub System Vibration and Chatter: Innovative one piece design reduces the number of parts and eliminates failures commonly seen in multi-part hub systems.
Eliminate Hub Cracking and Failure: The glass reinforced high-tech polymer construction increases flexibility, eliminating potential material stress fractures.
Corrosion Resistant Materials: Premium corrosion resistant durable marine bronze splines.
Reduce Gear Shock and Engine/Drive Damage: MasterGuard hubs offer Shock absorbing high-tech polymer cushion with lower unit protection.
Easy to Install: Clear and easy step-by-step directions coupled with minimal parts makes installation easy.
ALT Part Numbers: TUR 11700500, 39-6125
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Turning Point Propellers
SKU:708-11700500
UPC:652480206788
TURNING POINT PROPELLERS 11700700 HUB MASTERGUARD S/D 707 200+HP
Price: $99.49
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Turning Point Propellers MasterGuard Super Duty Installation Kit 707 (11700700)
Turning Point is the only company to offer MasterGuard® Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 33% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed (hub warranty on consumer use only - visit https://tpprops.com/warranty for details) . These hubs offer enhancedlower unit protection.
Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems.
Eliminate Hub System Vibration and Chatter: Innovative one piece design reduces the number of parts and eliminates failures commonly seen in multi-part hub systems.
Eliminate Hub Cracking and Failure: The glass reinforced high-tech polymer construction increases flexibility, eliminating potential material stress fractures.
Corrosion Resistant Materials: Premium corrosion resistant durable marine bronze splines.
Reduce Gear Shock and Engine/Drive Damage: MasterGuard hubs offer Shock absorbing high-tech polymer cushion with lower unit protection.
Easy to Install: Clear and easy step-by-step directions coupled with minimal parts makes installation easy.
- MasterGuard Super Duty 700 Series Installation Kit for Engines 4.75" Gearcases
- Lifetime warranty for engines 200+hp with stainless steel props.
- New Hub for High Horsepower Outboards and Sterndrives High Horsepower Outboards and Sterndrives put extreme stress on a boat's driveline components. The increased torque output of supercharged, V-6 and V-8, and diesel outboards are testing the limits of modern metallurgy and thermoplastic engineering.
- For any installation of 200+hp Engine w/ a S/S Prop, the use of a 700 Series Super Duty Kit is now required to qualify for our Lifetime Warranty (Otherwise use the standard 500 Series).
- MasterGuard Installation/Hub Kits carry the only Lifetime Warranty in the WORLD!
- Hubs have no warranty restrictions, except for extreme commercial use.
- Saves a boater up to 33% on replacement propeller purchases (need to purchase prop housing only).
- One piece design: durable marine Bronze with Over Molded Glass Filled Nylon for Long Life.
- Re-useable after a Prop Strike.
- Warranted even if the prop is Destroyed! (consumer normal use only, not applicable on commercial applications)
- Enhanced lower unit protection.
- Warranted even if used in competitive propeller housings (Mercury, Michigan Wheel, Solas).
- Each kit contains a hub, thrust washer, and other hardware for installing Turning Point Express Mach3, Mach3 OS, and Mach4 propeller housings on most engines with 4.75" gearcase.
- Also used as a hub upgrade to fit Solas Rubex, Michigan Wheel XHS, and Mercury FloTorq propeller housings.
- Installation Kits for Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, & Yamaha® Outboards and Sterndrives.
- See application chart for engine application information.
Turning Point is the only company to offer MasterGuard® Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 33% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed (hub warranty on consumer use only - visit https://tpprops.com/warranty for details) . These hubs offer enhancedlower unit protection.
Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems.
Eliminate Hub System Vibration and Chatter: Innovative one piece design reduces the number of parts and eliminates failures commonly seen in multi-part hub systems.
Eliminate Hub Cracking and Failure: The glass reinforced high-tech polymer construction increases flexibility, eliminating potential material stress fractures.
Corrosion Resistant Materials: Premium corrosion resistant durable marine bronze splines.
Reduce Gear Shock and Engine/Drive Damage: MasterGuard hubs offer Shock absorbing high-tech polymer cushion with lower unit protection.
Easy to Install: Clear and easy step-by-step directions coupled with minimal parts makes installation easy.
ALT Part Numbers: TUR 11700700, 39-6126
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Turning Point Propellers
SKU:708-11700700
UPC:652480206795
TURNING POINT PROPELLERS 11700800 HUB MASTERGUARD S/D 708 200+HP
Price: $93.99
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Turning Point Propellers MasterGuard Super Duty Installation Kit 708 (11700800)
Turning Point is the only company to offer MasterGuard® Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 33% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed (hub warranty on consumer use only - visit https://tpprops.com/warranty for details) . These hubs offer enhancedlower unit protection.
Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems.
Eliminate Hub System Vibration and Chatter: Innovative one piece design reduces the number of parts and eliminates failures commonly seen in multi-part hub systems.
Eliminate Hub Cracking and Failure: The glass reinforced high-tech polymer construction increases flexibility, eliminating potential material stress fractures.
Corrosion Resistant Materials: Premium corrosion resistant durable marine bronze splines.
Reduce Gear Shock and Engine/Drive Damage: MasterGuard hubs offer Shock absorbing high-tech polymer cushion with lower unit protection.
Easy to Install: Clear and easy step-by-step directions coupled with minimal parts makes installation easy.
- MasterGuard Super Duty 700 Series Installation Kit for Engines 4.75" Gearcases
- Lifetime warranty for engines 200+hp with stainless steel props.
- New Hub for High Horsepower Outboards and Sterndrives High Horsepower Outboards and Sterndrives put extreme stress on a boat's driveline components. The increased torque output of supercharged, V-6 and V-8, and diesel outboards are testing the limits of modern metallurgy and thermoplastic engineering.
- For any installation of 200+hp Engine w/ a S/S Prop, the use of a 700 Series Super Duty Kit is now required to qualify for our Lifetime Warranty (Otherwise use the standard 500 Series).
- MasterGuard Installation/Hub Kits carry the only Lifetime Warranty in the WORLD!
- Hubs have no warranty restrictions, except for extreme commercial use.
- Saves a boater up to 33% on replacement propeller purchases (need to purchase prop housing only).
- One piece design: durable marine Bronze with Over Molded Glass Filled Nylon for Long Life.
- Re-useable after a Prop Strike.
- Warranted even if the prop is Destroyed! (consumer normal use only, not applicable on commercial applications)
- Enhanced lower unit protection.
- Warranted even if used in competitive propeller housings (Mercury, Michigan Wheel, Solas).
- Each kit contains a hub, thrust washer, and other hardware for installing Turning Point Express Mach3, Mach3 OS, and Mach4 propeller housings on most engines with 4.75" gearcase.
- Also used as a hub upgrade to fit Solas Rubex, Michigan Wheel XHS, and Mercury FloTorq propeller housings.
- Installation Kits for Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, & Yamaha® Outboards and Sterndrives.
- See application chart for engine application information.
Turning Point is the only company to offer MasterGuard® Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 33% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed (hub warranty on consumer use only - visit https://tpprops.com/warranty for details) . These hubs offer enhancedlower unit protection.
Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems.
Eliminate Hub System Vibration and Chatter: Innovative one piece design reduces the number of parts and eliminates failures commonly seen in multi-part hub systems.
Eliminate Hub Cracking and Failure: The glass reinforced high-tech polymer construction increases flexibility, eliminating potential material stress fractures.
Corrosion Resistant Materials: Premium corrosion resistant durable marine bronze splines.
Reduce Gear Shock and Engine/Drive Damage: MasterGuard hubs offer Shock absorbing high-tech polymer cushion with lower unit protection.
Easy to Install: Clear and easy step-by-step directions coupled with minimal parts makes installation easy.
ALT Part Numbers: TUR 11700800, 39-6127
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Turning Point Propellers
SKU:708-11700800
UPC:652480206801
TURNING POINT PROPELLERS 11701500 HUB MASTERGUARD S/D 715 200+HP
Price: $113.49
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Turning Point Propellers MasterGuard Super Duty Installation Kit 715 (11701500)
Turning Point is the only company to offer MasterGuard® Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 33% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed (hub warranty on consumer use only - visit https://tpprops.com/warranty for details) . These hubs offer enhancedlower unit protection.
Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems.
Eliminate Hub System Vibration and Chatter: Innovative one piece design reduces the number of parts and eliminates failures commonly seen in multi-part hub systems.
Eliminate Hub Cracking and Failure: The glass reinforced high-tech polymer construction increases flexibility, eliminating potential material stress fractures.
Corrosion Resistant Materials: Premium corrosion resistant durable marine bronze splines.
Reduce Gear Shock and Engine/Drive Damage: MasterGuard hubs offer Shock absorbing high-tech polymer cushion with lower unit protection.
Easy to Install: Clear and easy step-by-step directions coupled with minimal parts makes installation easy.
- MasterGuard Super Duty 700 Series Installation Kit for Engines 4.75" Gearcases
- Lifetime warranty for engines 200+hp with stainless steel props.
- New Hub for High Horsepower Outboards and Sterndrives High Horsepower Outboards and Sterndrives put extreme stress on a boat's driveline components. The increased torque output of supercharged, V-6 and V-8, and diesel outboards are testing the limits of modern metallurgy and thermoplastic engineering.
- For any installation of 200+hp Engine w/ a S/S Prop, the use of a 700 Series Super Duty Kit is now required to qualify for our Lifetime Warranty (Otherwise use the standard 500 Series).
- MasterGuard Installation/Hub Kits carry the only Lifetime Warranty in the WORLD!
- Hubs have no warranty restrictions, except for extreme commercial use.
- Saves a boater up to 33% on replacement propeller purchases (need to purchase prop housing only).
- One piece design: durable marine Bronze with Over Molded Glass Filled Nylon for Long Life.
- Re-useable after a Prop Strike.
- Warranted even if the prop is Destroyed! (consumer normal use only, not applicable on commercial applications)
- Enhanced lower unit protection.
- Warranted even if used in competitive propeller housings (Mercury, Michigan Wheel, Solas).
- Each kit contains a hub, thrust washer, and other hardware for installing Turning Point Express Mach3, Mach3 OS, and Mach4 propeller housings on most engines with 4.75" gearcase.
- Also used as a hub upgrade to fit Solas Rubex, Michigan Wheel XHS, and Mercury FloTorq propeller housings.
- Installation Kits for Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, & Yamaha® Outboards and Sterndrives.
- See application chart for engine application information.
Turning Point is the only company to offer MasterGuard® Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 33% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed (hub warranty on consumer use only - visit https://tpprops.com/warranty for details) . These hubs offer enhancedlower unit protection.
Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems.
Eliminate Hub System Vibration and Chatter: Innovative one piece design reduces the number of parts and eliminates failures commonly seen in multi-part hub systems.
Eliminate Hub Cracking and Failure: The glass reinforced high-tech polymer construction increases flexibility, eliminating potential material stress fractures.
Corrosion Resistant Materials: Premium corrosion resistant durable marine bronze splines.
Reduce Gear Shock and Engine/Drive Damage: MasterGuard hubs offer Shock absorbing high-tech polymer cushion with lower unit protection.
Easy to Install: Clear and easy step-by-step directions coupled with minimal parts makes installation easy.
ALT Part Numbers: TUR 11701500, 39-6128
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Turning Point Propellers
SKU:708-11701500
UPC:652480206818
ACME PROPS 2755 PROP-17.0X14.0 LH 4BL BR1.25
Price: $1,523.16
Product Description: Acme 2755 17 x 14 L 1-1/4" Bore .105 Cup, 4-Blade All Acme propellers are engineered, manufactured, inspected and shipped directly from Acme's U.S. facilities. Acme's CNC process provides the most accurate method for consistently producing propellers to the correct diameter, pitch and cup, etc. Through this process, Acme can "dial-in" to make incremental changes in any or all of these elements, which enables the development of an optimum propeller for each specific make and model of boat. Boats using Acme Propellers are discovering their true performance potential - directly out of an Acme box.
ALT Part Numbers: ACM 2755, 39-4242
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Acme Props
SKU:314-2755
UPC:Not Assigned
ACME PROPS 2775 PROP-15.0X12.5 LH 4BL BR1.125
Price: $1,204.17
Product Description: Acme 2775 15 x 12-1/2 L 1-1/8" Bore .075 Cup, 4-Blade All Acme propellers are engineered, manufactured, inspected and shipped directly from Acme's U.S. facilities. Acme's CNC process provides the most accurate method for consistently producing propellers to the correct diameter, pitch and cup, etc. Through this process, Acme can "dial-in" to make incremental changes in any or all of these elements, which enables the development of an optimum propeller for each specific make and model of boat. Boats using Acme Propellers are discovering their true performance potential - directly out of an Acme box.
ALT Part Numbers: ACM 2775, 38-0952
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Acme Props
SKU:314-2775
UPC:Not Assigned
