Product Search

Product Description: Turning Point Propellers MasterGuard Super Duty Installation Kit 711 (11701100)

• MasterGuard Super Duty 700 Series Installation Kit for Engines 4.75" Gearcases
• Lifetime warranty for engines 200+hp with stainless steel props.
• New Hub for High Horsepower Outboards and Sterndrives High Horsepower Outboards and Sterndrives put extreme stress on a boat's driveline components. The increased torque output of supercharged, V-6 and V-8, and diesel outboards are testing the limits of modern metallurgy and thermoplastic engineering.
• For any installation of 200+hp Engine w/ a S/S Prop, the use of a 700 Series Super Duty Kit is now required to qualify for our Lifetime Warranty (Otherwise use the standard 500 Series).
• MasterGuard Installation/Hub Kits carry the only Lifetime Warranty in the WORLD!
• Hubs have no warranty restrictions, except for extreme commercial use.
• Saves a boater up to 33% on replacement propeller purchases (need to purchase prop housing only).
• One piece design: durable marine Bronze with Over Molded Glass Filled Nylon for Long Life.
• Re-useable after a Prop Strike.
• Warranted even if the prop is Destroyed! (consumer normal use only, not applicable on commercial applications)
• Enhanced lower unit protection.
• Warranted even if used in competitive propeller housings (Mercury, Michigan Wheel, Solas).
• Each kit contains a hub, thrust washer, and other hardware for installing Turning Point Express Mach3, Mach3 OS, and Mach4 propeller housings on most engines with 4.75" gearcase.
• Also used as a hub upgrade to fit Solas Rubex, Michigan Wheel XHS, and Mercury FloTorq propeller housings.
• Installation Kits for Evinrude^®, Honda^®, Johnson^®, Mariner^®, Mercury^®, MerCruiser^®, Nissan^®, OMC^®, Parsun^®, Suzuki^®, Tohatsu^®, & Yamaha^® Outboards and Sterndrives.
• See application chart for engine application information.

Turning Point is the only company to offer MasterGuard^® Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 33% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed (hub warranty on consumer use only - visit https://tpprops.com/warranty for details) . These hubs offer enhancedlower unit protection.

Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems.

Eliminate Hub System Vibration and Chatter: Innovative one piece design reduces the number of parts and eliminates failures commonly seen in multi-part hub systems.
Eliminate Hub Cracking and Failure: The glass reinforced high-tech polymer construction increases flexibility, eliminating potential material stress fractures.
Corrosion Resistant Materials: Premium corrosion resistant durable marine bronze splines.
Reduce Gear Shock and Engine/Drive Damage: MasterGuard hubs offer Shock absorbing high-tech polymer cushion with lower unit protection.
Easy to Install: Clear and easy step-by-step directions coupled with minimal parts makes installation easy.

Product Description: Turning Point Propellers 21431130 Hustler Propeller 14x11, 4-Blade Aluminum, RH Rotation (Standard) Hustler^® Aluminum Swept Cleaver 4 Blade Props for 40-150hp Engines with 4.25" Gearcases.
4 Blades That Re-wrote the Rules. The props that put the "four" in Perfourmance! These props re-wrote the rules, proving that you can run a 4-Blade that has:
- Unprecedented hole shot, lift, handling, ease of steering, and rough water stability.
- No top-end speed loss you experience with other manufacturers' 4 blade propellers – keeps 3 blade top end speed.
- Lifts the entire boat higher out of the water.
By lifting the hull higher, boats tend to lose less speed when fully loaded versus a 3-Blade prop. With a lightly loaded boat, a 3-Blade is usually the faster prop for most applications. Alternatively when an application is loaded down with extra people and gear, a 3-Bladed prop can lose up to 3 MPH. This is because the hull is forced deeper into the water causing more wetted surface by the added weight. By lifting the hull higher the Turning Point 4 blade when fully loaded does not lose the top end speed compared to a 3-Blade propeller.

• Stainless steel performance at aluminum prices.
• 4 blade Swept Cleaver prop that has 3 blade top end speed with fast hole shot and unmatched handling.
• Tuned exhaust vents improve hole shot and "Best in class" reversibility.
• Squeeze casting adds strength that boosts performance.
• Protected by five-step powder-coated finish.
• Propellers fit Evinrude^®, Honda^®, Johnson^®, Mariner^®, Mercury^®, MerCruiser^®, Nissan^®, OMC^®, Parsun^®, Suzuki^®, Tohatsu^®, & Yamaha^® Outboards and Sterndrives.
• Uses 500 series Installation/hub kits only-Sold separately.
• See application chart for engine application information and required Installation/hub kit part numbers.

Turning Point Hustler aluminum props function just like Express stainless steel designs and run within 0.5MPH to 1MPH of each other most of the time. There are many reasons for this:
- Hustler props are produced from the same stainless steel geometry & drawing.
- Hustler is cast using the latest state-of-the-art squeeze casting technologies.
The competition does NOT use stainless steel blade geometry with no-blade-flex squeeze cast technology in their aluminum propellers. Competitive Die-Cast aluminum propellers significantly under perform when compared to stainless steel designs seen in the market.

The Huslter 4 blade series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older aluminum designs from the 70's, 80's, 90's, and '00's, and will outrun most newer props, including five blade ski props.

Squeeze Cast for Added Strength:
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.

Long Lasting Ultracoat™ Powder Coated Finish:
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.

Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.