SEASTAR SOLUTIONS JP5100R JACKPLATE HYD 10" SETBACK STD
Price: $2,129.99
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Seastar Solutions JP5100R Standard Hydraulic Jackplate, 10" Setback The SeaStar Standard Jackplate is one of the sleekest and most durable engine Jackplates available. This essential performance accessory allows for higher speed, gains in fuel economy and the ability to run in shallow water. The SeaStar Jackplate features sleek, bold styling that is redefining the look for Jackplates.
Available in 4", 6", 8", 10" & 12" setbacks, it also has a new, high speed, hydraulic actuator that lifts engines 5.8" in 8.5 seconds. Rated for 300 horsepower engines. Tilt when used with SeaStar steering cylinders.
Available in 4", 6", 8", 10" & 12" setbacks, it also has a new, high speed, hydraulic actuator that lifts engines 5.8" in 8.5 seconds. Rated for 300 horsepower engines. Tilt when used with SeaStar steering cylinders.
- Our Standard Jackplate is easily capable of handling up to 300 horsepower engines
- Rapid hydraulic response in 8.5 seconds
- Complete engine support at full thrust
- Easily moves engine up or down at full thrust
- Smooth operation with composite bushings
- Easy wrench access to engine bolts from the side
- Compatible with Power Pole® and Talon®
ALT Part Numbers: DTW JP5100R, 42-7281
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Seastar Solutions
SKU:861-JP5100R
UPC:731957929662
AC DELCO SPARK PLUGS MR43T4 SPARK PLUG AC#MR43T RESISTR @4
Price: $28.16
Price is for 4 units.
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: AC Resistor Spark Plug #MR43T4 Sold in standard pack only.
ALT Part Numbers: ACD MR43T4, 39-9214
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Ac Delco Spark Plugs
SKU:603-MR43T4
UPC:Not Assigned
JOHNSON PUMP/MAYFAIR 812B-1 IMPELLER F6 MC97 BULK 20 PACK
Price: $882.15
Product Description: Johnson F6B Impeller Pack (20 Impellers Only w/o Gasket or O-Rings) Impellers used by Original Equipment Manufacturers for over 50 years with the strict tolerances that deliver maximum performance in engine cooling.
- Stable pressure delivering correct cooling at startup and continued running
- MC97 rubber compound minimizes swelling with less failures due to fatigue
- Exact OEM required dimensions resulting in less blade wear & better engine cooling
- Broadest offering in the marine market space. (Not one size fits many approach)
ALT Part Numbers: JPI 812B1, 30-2854
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Johnson Pump/mayfair
SKU:189-812B1
UPC:729321918305
BUFFALO RAGS 90820 CS/100 BONDED OIL ABSORBENT
Price: $113.99
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Buffalo Recycled Medium Weight Oil Only Sorbent Pads (100 Per Pack) 100% Recycled polypropylene Oil-Only Sorbents absorb all oil-based fluids such as engine oil, hydraulic oil, transmission fluid, engine fuels, gasoline and kerosene. These pads have quick absorption speed and capacity while still being flexible enough to conform to the shape needed and are laminated and bonded on both sides for increased tear resistance and durability.
ALT Part Numbers: BUF 90820, 06-9783
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Buffalo Rags
SKU:199-90820
UPC:Not Assigned
SELOC PUBLISHING 18-01101 MAN FORCE 62-99 3-150HP 1-5CYL
Price: $61.87
Product Description: Seloc Marine Manual For Force Outboards, All Engines 1962-99 The only marine tune-up manuals to be certified by the engine manufacturers as accurate and complete. Seloc uses easy to understand, step-by-step, illustrated procedures for the complete dismantling, repair, and assembling of marine powerplants. The illustrations are mainly photographs taken during the actual work. Each numbered step procedure is accompanied by the same numbered photograph or illustration making Seloc manuals easy to follow. Seloc chapters are divided into complete areas of work such as electrical, ignition, fuel, etc., making it much easier to find the procedure for the job to be performed.
ALT Part Numbers: SEC 1101, 39-9642
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Seloc Publishing
SKU:230-1101
UPC:715568011015
COOK MFG 13002 TILT/TRIM MOTOR W/O GUAGE
Price: $1,519.29
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: CMC PT-130 ELECTRIC HYDRAULIC TILT & TRIM You get power tilt & trim, better boat handling, more speed, lower fuel consumption and no more back strain.
- Rated for 130 H.P. and Smaller Motors
- 6" Set Back to Enhance Boat Stability and Performance
- 20° of Trim and a Total of 90° of Tilt and Trim
- 1/2" 6061 T6 Extruded Aluminum Construction with S/S Fasteners
- Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust
- Standard B.I.A. (Bolt Hole Pattern)
- Convenient Adapter Kit Available for Clamp-on Motors
- Four S/S Motor Mounting Bolts Included
ALT Part Numbers: CMC 13002, 87-3350
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
SKU:119-13002
UPC:739697130027
COOK MFG 20122 CMC WEDGES (2/SET) 2 DEG
Price: $140.99
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: CMC 20122 2° Transom Wedges/Set Back Spacers Designed to give extra positive or negative trim. 1/2" x 4" x 11-1/4".
- Used as an aid for boats with an insufficient transom angle or for boats having planing problems at low speed
- Unique design of the CMC Transom Wedges allows you to also use them as set back spacers, simply stack and invert 2, 4, and 6 sets
- Fit all Transom jacks, jack plates, Outboard lifts, tilt trim units, and outboard motors with a standard B.I.A bolt pattern
- Made of strong 6061 T6 alloy aluminum (not cast aluminum)
ALT Part Numbers: CMC 20122, 41-3598
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
SKU:119-20122
UPC:739697201222
COOK MFG 52060 BOTTOM CLEVIS BRACKET TH-CMC
Price: $42.29
Not In StockMay be available soon with price change.
Item may be special order or out of stock. Please call 321-952-1303 or Contact Us for price and availability.
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: CMC 52060 Bottom Clevis Bracket Bottom Clevis Bracket
ALT Part Numbers: CMC 52060, 25-5604
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
SKU:119-52060
UPC:739697052060
COOK MFG 52100 PT35 TILT & TRIM - NO GAUGE
Price: $1,170.29
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: CMC 52100 PT-35 12V Tilt N' Trim For 35 HP & Smaller Motors
- 5-1/2" Set Back enhances stability & performance
- 84° Trim & Tilt
- 1/4" 6061 T6 Extruded aluminum construction w/SS Fasteners
- Electric Hydraulic Actuator rated at 7853 lbs. of thrust
- Accommodates clamp-on or bolt-on motors - No adapter needed
- Mounting bolts NOT included
- Only 24lbs.
ALT Part Numbers: CMC 52100, 87-3352
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
SKU:119-52100
UPC:739697521009
COOK MFG 65301 JACKPLATE-HI SPD 5.5IN W-GAUGE
Price: $2,372.99
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: CMC 65301 PL65HS High Speed Hydraulic Power-Lift® Transom Jack w/Gauge Will raise V-6 300hp and smaller outboard motors in approximately 8 seconds, twice as fast as the PL-65 model. Ideal for those who want a jack plate for high speed positioning of their outboard motor. Made of 6061 T6 alloy aluminum extrusions and fastened with stainless fasteners. No welds or castings to break. Ideal for fresh or salt water use. Mounting hardware included.
ALT Part Numbers: CMC 65301, 33-2570
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
SKU:119-65301
UPC:739697653014
