This is the new (September, 2020) Carp Coastal Marine website. Looking for our old online shopping website? Both websites allow purchasing of our entire line of marine supplies. Click Here for the old Marine Store Please see our Covid-19 Statement

Category: Propellers

LENCO 15060-001 4 1/4 STROKE XD ACTUATOR 6FT W
$343.39 Sale Price: $291.40
Product Description: 12V Replacement Actuator - 102 XD Series
12 Volt actuator for ski boats and tow boats. Includes Deutsch connector. 6' cable and mounting hardware.
  • 102 HD Series: Standard actuator for Trolling Tab systems sold from 2000 to present
ALT Part Numbers: LEN 15060001, 02-8558

Brand:Lenco

SKU:622-15060001

UPC:874847003254

TURNING POINT PROPELLERS 21100910 PROP HUSTLER 3BL AL 9X9 RH
$65.89 Sale Price: $52.09
Product Description: Turning Point Propellers 21100910 Hustler Propeller 9x9, 3-Blade Aluminum, RH Rotation (Standard)
  • Hustler® Aluminum 3 Blade Props for 6-20hp Engines with 2.5" Gearcases
  • Features increased blade surfaces, cupping, and improved geometry for great all-around performance
  • Stainless steel performance at aluminum prices
  • Prop blades resist flex for improved fuel economy and performance
  • Squeeze casting adds strength that boosts performance
  • Protected by five-step powder-coated finish
  • Uses 200 series Installation/hub kits only-sold separately
  • See application chart for engine application information and required Installation/hub kit part numbers


Turning Point Hustler aluminum props function just like Express stainless steel designs and run within 0.5MPH to 1MPH of each other most of the time. There are many reasons for this:
- Hustler props are produced from the same stainless steel geometry & drawing.
- Hustler is cast using the latest state-of-the-art squeeze casting technologies.
The competition does NOT use stainless steel blade geometry with no-blade-flex squeeze cast technology in their aluminum propellers. Competitive Die-Cast aluminum propellers significantly under perform when compared to stainless steel designs seen in the market.

The 3-Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities.

Squeeze Cast for Added Strength:
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.

Long Lasting Ultracoat™ Powder Coated Finish:
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.

Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
ALT Part Numbers: TUR 21100910, 23-6395, 26-6680

Brand:Turning Point Propellers

SKU:708-21100910

UPC:652480101014

TURNING POINT PROPELLERS 21101010 PROP HUSTLER 3BL AL 9X10 RH
$65.89 Sale Price: $52.09
Product Description: Turning Point Propellers 21101010 Hustler Propeller 9x10, 3-Blade Aluminum, RH Rotation (Standard)
  • Hustler® Aluminum 3 Blade Props for 6-20hp Engines with 2.5" Gearcases
  • Features increased blade surfaces, cupping, and improved geometry for great all-around performance
  • Stainless steel performance at aluminum prices
  • Prop blades resist flex for improved fuel economy and performance
  • Squeeze casting adds strength that boosts performance
  • Protected by five-step powder-coated finish
  • Uses 200 series Installation/hub kits only-sold separately
  • See application chart for engine application information and required Installation/hub kit part numbers


Turning Point Hustler aluminum props function just like Express stainless steel designs and run within 0.5MPH to 1MPH of each other most of the time. There are many reasons for this:
- Hustler props are produced from the same stainless steel geometry & drawing.
- Hustler is cast using the latest state-of-the-art squeeze casting technologies.
The competition does NOT use stainless steel blade geometry with no-blade-flex squeeze cast technology in their aluminum propellers. Competitive Die-Cast aluminum propellers significantly under perform when compared to stainless steel designs seen in the market.

The 3-Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities.

Squeeze Cast for Added Strength:
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.

Long Lasting Ultracoat™ Powder Coated Finish:
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.

Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
ALT Part Numbers: TUR 21101010, 26-6681, 23-6396

Brand:Turning Point Propellers

SKU:708-21101010

UPC:652480101021

TURNING POINT PROPELLERS 21110910 PROP HUSTLER 3BL AL 9X9 RH
$65.89 Sale Price: $52.09
Product Description: Turning Point Propellers 21110910 Hustler Propeller 9x9, 3-Blade Aluminum, RH Rotation (Standard)
  • Hustler® Aluminum 3 Blade Props for 6-20hp Engines with 2.5" Gearcases
  • Features increased blade surfaces, cupping, and improved geometry for great all-around performance
  • Stainless steel performance at aluminum prices
  • Prop blades resist flex for improved fuel economy and performance
  • Squeeze casting adds strength that boosts performance
  • Protected by five-step powder-coated finish
  • Uses 200 series Installation/hub kits only-sold separately
  • See application chart for engine application information and required Installation/hub kit part numbers


Turning Point Hustler aluminum props function just like Express stainless steel designs and run within 0.5MPH to 1MPH of each other most of the time. There are many reasons for this:
- Hustler props are produced from the same stainless steel geometry & drawing.
- Hustler is cast using the latest state-of-the-art squeeze casting technologies.
The competition does NOT use stainless steel blade geometry with no-blade-flex squeeze cast technology in their aluminum propellers. Competitive Die-Cast aluminum propellers significantly under perform when compared to stainless steel designs seen in the market.

The 3-Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities.

Squeeze Cast for Added Strength:
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.

Long Lasting Ultracoat™ Powder Coated Finish:
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.

Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
ALT Part Numbers: TUR 21110910, 26-6682, 23-6397

Brand:Turning Point Propellers

SKU:708-21110910

UPC:652480101038

TURNING POINT PROPELLERS 21111010 PROP HUSTLER 3BL AL 9X10 RH
$65.89 Sale Price: $52.09
Product Description: Turning Point Propellers 21111010 Hustler Propeller 9x10, 3-Blade Aluminum, RH Rotation (Standard)
  • Hustler® Aluminum 3 Blade Props for 6-20hp Engines with 2.5" Gearcases.
  • Features increased blade surfaces, cupping, and improved geometry for great all-around performance.
  • Stainless steel performance at aluminum prices.
  • Prop blades resist flex for improved fuel economy and performance.
  • Squeeze casting adds strength that boosts performance.
  • Protected by five-step powder-coated finish.
  • Propellers fit Colman®, Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, Nissan®, Parsun®, Suzuki®, Tohatsu®, & Yamaha® Outboards.
  • Uses 200 series Installation/hub kits only-Sold separately.
  • See application chart for engine application information and required Installation/hub kit part numbers.


Turning Point Hustler aluminum props function just like Express stainless steel designs and run within 0.5MPH to 1MPH of each other most of the time. There are many reasons for this:
- Hustler props are produced from the same stainless steel geometry & drawing.
- Hustler is cast using the latest state-of-the-art squeeze casting technologies.
The competition does NOT use stainless steel blade geometry with no-blade-flex squeeze cast technology in their aluminum propellers. Competitive Die-Cast aluminum propellers significantly under perform when compared to stainless steel designs seen in the market.

The 3-Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.

Squeeze Cast for Added Strength:
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.

Long Lasting Ultracoat™ Powder Coated Finish:
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.

Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
ALT Part Numbers: TUR 21111010, 26-6683, 23-6398

Brand:Turning Point Propellers

SKU:708-21111010

UPC:652480101045

TURNING POINT PROPELLERS 21201110 PROP HUSTLER 3B AL 10.5X11 RH
$73.79 Sale Price: $58.33
Product Description: Turning Point Propellers 21201110 Hustler Propeller 10.5x11, 3-Blade Aluminum, RH Rotation (Standard)
  • Hustler® Aluminum 3 Blade Props for 9.9-35hp Engines with 3" Gearcases
  • Features increased blade surfaces, cupping, and improved geometry for great all-around performance
  • Stainless steel performance at aluminum prices
  • Prop blades resist flex for improved fuel economy and performance
  • Squeeze casting adds strength that boosts performance
  • Protected by five-step powder-coated finish
  • Uses 20 series Installation/hub kits only-sold separately
  • See application chart for engine application information and required Installation/hub kit part numbers


Turning Point Hustler aluminum props function just like Express stainless steel designs and run within 0.5MPH to 1MPH of each other most of the time. There are many reasons for this:
- Hustler props are produced from the same stainless steel geometry & drawing.
- Hustler is cast using the latest state-of-the-art squeeze casting technologies.
The competition does NOT use stainless steel blade geometry with no-blade-flex squeeze cast technology in their aluminum propellers. Competitive Die-Cast aluminum propellers significantly under perform when compared to stainless steel designs seen in the market.

The 3-Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities.

Squeeze Cast for Added Strength:
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.

Long Lasting Ultracoat™ Powder Coated Finish:
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.

Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
ALT Part Numbers: TUR 21201110, 23-6404, 26-6674

Brand:Turning Point Propellers

SKU:708-21201110

UPC:652480100499

TURNING POINT PROPELLERS 21201310 PROP HUSTLR 3B AL 10 1-8X13 RH
$73.79 Sale Price: $58.33
Product Description: Turning Point Propellers 21201310 Hustler Propeller 10.125x13, 3-Blade Aluminum, RH Rotation (Standard)
  • Hustler® Aluminum 3 Blade Props for 9.9-35hp Engines with 3" Gearcases
  • Features increased blade surfaces, cupping, and improved geometry for great all-around performance
  • Stainless steel performance at aluminum prices
  • Prop blades resist flex for improved fuel economy and performance
  • Squeeze casting adds strength that boosts performance
  • Protected by five-step powder-coated finish
  • Uses 20 series Installation/hub kits only-sold separately
  • See application chart for engine application information and required Installation/hub kit part numbers


Turning Point Hustler aluminum props function just like Express stainless steel designs and run within 0.5MPH to 1MPH of each other most of the time. There are many reasons for this:
- Hustler props are produced from the same stainless steel geometry & drawing.
- Hustler is cast using the latest state-of-the-art squeeze casting technologies.
The competition does NOT use stainless steel blade geometry with no-blade-flex squeeze cast technology in their aluminum propellers. Competitive Die-Cast aluminum propellers significantly under perform when compared to stainless steel designs seen in the market.

The 3-Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities.

Squeeze Cast for Added Strength:
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.

Long Lasting Ultracoat™ Powder Coated Finish:
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.

Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
ALT Part Numbers: TUR 21201310, 23-6405, 26-6675

Brand:Turning Point Propellers

SKU:708-21201310

UPC:652480100482

TURNING POINT PROPELLERS 21211110 PROP HUSTLR 3B AL 10 3-8X11 RH
$73.79 Sale Price: $58.33
Product Description: Turning Point Propellers 21211110 Hustler Propeller 10.375x11, 3-Blade Aluminum, RH Rotation (Standard)
  • Hustler® Aluminum 3 Blade Props for 9.9-35hp Engines with 3" Gearcases
  • Features increased blade surfaces, cupping, and improved geometry for great all-around performance
  • Stainless steel performance at aluminum prices
  • Prop blades resist flex for improved fuel economy and performance
  • Squeeze casting adds strength that boosts performance
  • Protected by five-step powder-coated finish
  • Uses 20 series Installation/hub kits only-sold separately
  • See application chart for engine application information and required Installation/hub kit part numbers


Turning Point Hustler aluminum props function just like Express stainless steel designs and run within 0.5MPH to 1MPH of each other most of the time. There are many reasons for this:
- Hustler props are produced from the same stainless steel geometry & drawing.
- Hustler is cast using the latest state-of-the-art squeeze casting technologies.
The competition does NOT use stainless steel blade geometry with no-blade-flex squeeze cast technology in their aluminum propellers. Competitive Die-Cast aluminum propellers significantly under perform when compared to stainless steel designs seen in the market.

The 3-Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities.

Squeeze Cast for Added Strength:
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.

Long Lasting Ultracoat™ Powder Coated Finish:
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.

Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
ALT Part Numbers: TUR 21211110, 23-6406, 26-6676

Brand:Turning Point Propellers

SKU:708-21211110

UPC:652480100512

TURNING POINT PROPELLERS 21211310 PROP HUSTLR 3B AL 10 3-8X13 RH
$73.79 Sale Price: $58.33
Product Description: Turning Point Propellers 21211310 Hustler Propeller 10.375x13, 3-Blade Aluminum, RH Rotation (Standard)
  • Hustler® Aluminum 3 Blade Props for 9.9-35hp Engines with 3" Gearcases
  • Features increased blade surfaces, cupping, and improved geometry for great all-around performance
  • Stainless steel performance at aluminum prices
  • Prop blades resist flex for improved fuel economy and performance
  • Squeeze casting adds strength that boosts performance
  • Protected by five-step powder-coated finish
  • Uses 20 series Installation/hub kits only-sold separately
  • See application chart for engine application information and required Installation/hub kit part numbers


Turning Point Hustler aluminum props function just like Express stainless steel designs and run within 0.5MPH to 1MPH of each other most of the time. There are many reasons for this:
- Hustler props are produced from the same stainless steel geometry & drawing.
- Hustler is cast using the latest state-of-the-art squeeze casting technologies.
The competition does NOT use stainless steel blade geometry with no-blade-flex squeeze cast technology in their aluminum propellers. Competitive Die-Cast aluminum propellers significantly under perform when compared to stainless steel designs seen in the market.

The 3-Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities.

Squeeze Cast for Added Strength:
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.

Long Lasting Ultracoat™ Powder Coated Finish:
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.

Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
ALT Part Numbers: TUR 21211310, 23-6407, 26-6677

Brand:Turning Point Propellers

SKU:708-21211310

UPC:652480100505

TURNING POINT PROPELLERS 21221110 PROP HUSTLER 3B AL 10.5X11 RH
$73.79 Sale Price: $58.33
Product Description: Turning Point Propellers 21221110 Hustler Propeller 10.5x11, 3-Blade Aluminum, RH Rotation (Standard)
  • Hustler® Aluminum 3 Blade Props for 9.9-35hp Engines with 3" Gearcases
  • Features increased blade surfaces, cupping, and improved geometry for great all-around performance
  • Stainless steel performance at aluminum prices
  • Prop blades resist flex for improved fuel economy and performance
  • Squeeze casting adds strength that boosts performance
  • Protected by five-step powder-coated finish
  • Uses 20 series Installation/hub kits only-sold separately
  • See application chart for engine application information and required Installation/hub kit part numbers


Turning Point Hustler aluminum props function just like Express stainless steel designs and run within 0.5MPH to 1MPH of each other most of the time. There are many reasons for this:
- Hustler props are produced from the same stainless steel geometry & drawing.
- Hustler is cast using the latest state-of-the-art squeeze casting technologies.
The competition does NOT use stainless steel blade geometry with no-blade-flex squeeze cast technology in their aluminum propellers. Competitive Die-Cast aluminum propellers significantly under perform when compared to stainless steel designs seen in the market.

The 3-Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities.

Squeeze Cast for Added Strength:
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.

Long Lasting Ultracoat™ Powder Coated Finish:
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.

Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
ALT Part Numbers: TUR 21221110, 23-6408, 26-6678

Brand:Turning Point Propellers

SKU:708-21221110

UPC:652480100536