Product Search

Product Description: Racor Parts, Water Sensor Probe500 Racor Parts, Water Sensor Probe For 220/500

Product Description: Racor Parts, Self Venting Drain Plug Racor Parts, Self Venting Drain Plug

Product Description: Racor Parts, Bowl Drain Fitting Racor Parts, Bowl Drain Fitting, 500/900/1000

Product Description: Groco GF-376 Fuel Filter Element Without O-Ring For GF-375 Separate dirt and water from fuel. 2-5 micron filtration. Use with gasoline or diesel fuel. Marine UL listed. Pressure tested bronze castings. Piping not disturbed when changing element. Maximum flow is 3-1/2 GPM with a maximum pressure of 75 psi.

Product Description: Racor LG100 Fuel/Air Seperator With 5/8" Hose Barb A typical refueling will send up to a half gallon or more of fuel spilling overboard. USCG and other regulations prohibit the discharge of oils including civil and criminal penalties.
Installed in the fuel tank vent line, the Racor Fuel/Air Separator efficiently separates air from fuel forced into the line. Air is vented, and all fuel is returned to the tank. The Fuel/Air Separator captures fuel normally discharged due to agitation and thermal expansion up to 2.4 PSI. It also eliminates damage to expensive striping and labels and protects finishes from fuel stains. The unit is maintenance free -- there's nothing to rust or corrode.
Fits neatly into your vent line, actually replacing a section of the line. One Fuel/Air Separator unit is required for each vent line. Hose barb: 5/8".
LG100: (17 CFPM max air flow, Size: 9-3/4" H x 4" dia.)
Stage One - Venting tank fuel is deflected by the flow diverter and fuel is directed down to the drain ports. Air is allowed to bypass and continues out.
Stage Two - Fuel defoams through a fine wire mesh screen which filters out large
contaminants. Under the screen, the fuel collects temporarily until it can flow back down to the fuel tank.
Stage Three - Vapor collects on the interior surfaces and coalesces. The fuel returns downward by gravity and air continues out. The safety relief valve includes a floating check ball which will not permit a large in-rush of fuel to bypass. In the event of internal pressure reaching 2.4 PSI (0.17 bar), the spring will compress and open the safety seat.

Product Description: Racor 10 Micron Gas Spin-On Fuel/Water Seperator With Clear Bowl for Outboards Spin-On series filters these filters are designed for high performance applications, and with flow rates between 30 and 120 GPH your engine will perform better than ever with clean, waterfree fuel. These filters are coated with a durable electrostatically applied powder coating for superior corrosion resistance. Features a high capacity Aquabloc^® II 10 micron filter element that removes sediment from water up to 99%. This Spin-On filter design is simple to replace and the re-usable clear plastic or metal contaminant collection bowls feature a self-venting drain, or metal plug, for removing unwanted muck and water. Max pressure 7 psi.
Clear Bowls: Use for outboard and above deck installations.

Product Description: 10 Micron Fuel Filter/Water Se Spin-On series filters these filters are designed for high performance applications, and with flow rates between 30 and 120 GPH your engine will perform better than ever with clean, waterfree fuel. These filters are coated with a durable electrostatically applied powder coating for superior corrosion resistance. Features a high capacity Aquabloc^® II 10 micron filter element that removes sediment from water up to 99%. This Spin-On filter design is simple to replace and the re-usable clear plastic or metal contaminant collection bowls feature a self-venting drain, or metal plug, for removing unwanted muck and water. Max pressure 7 psi.
Clear Bowls: Use for outboard and above deck installations.
Metal Bowls: USCG regulations require the use of flame resistant metal bowls below deck.

Product Description: Racor 10 Micron Gas Spin-On Fuel/Water Seperator With Clear Bowl for Outboards Spin-On series filters these filters are designed for high performance applications, and with flow rates between 30 and 120 GPH your engine will perform better than ever with clean, waterfree fuel. These filters are coated with a durable electrostatically applied powder coating for superior corrosion resistance. Features a high capacity Aquabloc^® II 10 micron filter element that removes sediment from water up to 99%. This Spin-On filter design is simple to replace and the re-usable clear plastic or metal contaminant collection bowls feature a self-venting drain, or metal plug, for removing unwanted muck and water. Max pressure 7 psi.
Clear Bowls: Use for outboard and above deck installations.

Product Description: Racor 10 Micron Gas Spin-On Fuel/Water Seperator With Metal Bowl for Inboard/Outboard Spin-On series filters these filters are designed for high performance applications, and with flow rates between 30 and 120 GPH your engine will perform better than ever with clean, waterfree fuel. These filters are coated with a durable electrostatically applied powder coating for superior corrosion resistance. Features a high capacity Aquabloc^® II 10 micron filter element that removes sediment from water up to 99%. This Spin-On filter design is simple to replace and the re-usable clear plastic or metal contaminant collection bowls feature a self-venting drain, or metal plug, for removing unwanted muck and water. Max pressure 7 psi.
Metal Bowls: USCG regulations require the use of flame resistant metal bowls below deck.

Product Description: Gas F/W Sep Filter Assy With Spin-On series filters these filters are designed for high performance applications, and with flow rates between 30 and 120 GPH your engine will perform better than ever with clean, waterfree fuel. These filters are coated with a durable electrostatically applied powder coating for superior corrosion resistance. Features a high capacity Aquabloc^® II 10 micron filter element that removes sediment from water up to 99%. This Spin-On filter design is simple to replace and the re-usable clear plastic or metal contaminant collection bowls feature a self-venting drain, or metal plug, for removing unwanted muck and water. Max pressure 7 psi.
Clear Bowls: Use for outboard and above deck installations.
Metal Bowls: USCG regulations require the use of flame resistant metal bowls below deck.